Alright, I was playing around with MHS builder and decided to do a slightly unorthadox setup, but it turned out really cool looking.
heres the image:
Things I'm worried about: Will all the wiring required for this fit? the hilt setup is MPS pommel style 4 connected to a 2 inch female-female extender -> MHS choke style 3 -> Double male connector -> 3 inch female-female extender -> crystal chamber -> blade emitter.
I would ideally like to use a buckpuck to wire the main LED, and the accent LED for the crystal to have a resistor. Guarded style switch in the 3 inch female extender then have the battery pack in the 2 inch bottom extender.. is this at all possible?
Bookmarks