MHS BASED saber build poll PART ONE - 3 days to vote!

[Lord Maul]

Polls will stay open for three days. You can vote for one entry. Please vote for your own ONLY if you truly feel that it is the best. The numbers have been mixed up - they are not ordered by submission date. These numbers are also not all of the contestants, they are just the MHS based ones. The custom build entries fill in the rest of the numbers.


DO NOT POST WHO YOU VOTED FOR IN THIS THREAD


Good luck to all contestants!


Entrant #1
Saber name: Ars Longa
Specs:
US 2.5
LUX III - Green (run in overdrive mode) w/QD
Premium speaker
Momentary guarded switch w/QD
Hand-cut (dremelled) de-chromed brass sink tube shroud
Kobold D-Ring belt clip (modified)
Enamel paint & powder coated accents



Entrant #2
Saber Name: The Ricker
Specs:
MR Windu Sound
7.4V Rechargeable battery pack
LedEngine RGBA- set to purple
Quick connect on LED
Modified TCSS heatsink
Modified TCSS Lux III optics holder
6 MHS parts, Powder coating by Tim
3 3mm red accent LED's - holes in ribbed piece by Tim
Latching illuminated AV switch- hole drilled by Tim
5v regulator
Buckpuck and resistors for LED's
Recharge Port/Killswitch
Pastor Jedi V2 lever
TFX Studios Obi EpIII circuit board
Custom sinktube overlays
Custom "graflex look" bunny ears




Entrant #4
Saber Name: The Odysseus
Specs:
US 2.5/PCB/battery pack single case modual
Built in recharge system
7.4 volt li ion battery solution
TCSS speaker
7 HO mako Accent LEDs: 5 blue, 2 green. (one of the blues is in the pommel)
green lighted ring AV switch
Uber Lux 5 blue
MHS Based body with heavy machine modification
custom machined brass grips
custom machined brass choke rods
Machine engraving on the grips of the saber name and business (not shown)
low profile LED holders
brass thumb screw
milled TCSS battery/speaker holder for wire clearance to the pommel
and everything polished to a mirror shine.




Entrant #8
Saber name: Isambard
Specs:
Anakin MR FX Board
Green Seoul P4 LED
Premium speaker
Guarded Latching switch
4 AAA batteries
Custom chassis with crystal chamber
Brass and aluminium blade holder (made by eBay seller 14485194)
Double male with slots (modified by Tim for the blade holder to fit in)
MHS choke style 1 short (with hole for the guarded switch drilled by Tim)
Two Trim Ring 3
7" Double female threaded connector
Polished brass sink tube
MPS Pommel style 4
Working Clockwork pommel insert
Brass covertec button
Leather grip
Custom brass emitter plug




Entrant #10
Saber name: Mjöllnir
Specs:
Seoul P4 Blue with 3.3ohm 5watt resistor
Latching Anti Vandal switch
4 AAA Battery pack



Entrant #11
Saber name: Marathon
Specs:
TCSS Luxeon 3W Driver V2
Hasbro 2010 Obi-Wan Electronic Soundboard (brown color)
20 second recordable greeting card soundboard (blue color)
Three 5mm accent LEDs (hooked up to the soundboard LED output)
Lux III Cyan Bin1
Premium speaker
Momentary switch
Master power DPDT sliding latching switch
2 Trustfires



Entrant #12
Saber name: Akhilesh
Specs:
CFv4.1
LED Engin RGBA: Red and Green wired for Amber
Blue FoC
10° Lens
Premium speaker
Nickel Plated AV momentary switch
Radio Shack momentary switch
4-18650 Li-Ion batteries wired in series/parallel
for 7.4Volts 5200mAh
Recharge port
Brass kill key
Rumble motor
Recessed Pommel insert #7
Modified by TCSS:
MHS Bladeholder #6
Solar Flat Black PC
MHS Hilt #2
Solar Flat Black PC
MHS Sleeve #1
Custom Drilled & Tapped
MHS Pommel #3v1
Solar Flat Black PC
Control Box by: Arm On Fire Custom Sabers
TCSS Thin walled Transparent White Polycarbonate blade
with Pointed Tip
Covertec Clip
Lighted pommel



Entrant #14
Saber Name: Yavin Sapphire
Specs:
Makotosai SuperOne Sound Board and LED strip Blade
Latching Switch
Accent Lights



Entrant #15
Saber name: Knights Slayer
Specs:
US 2.5
LED Lux III Royal Blue
Premium speaker
Reverse Sound
Lighted Chamber Blue 5mm
DPDT Momentary red illuminated switch



Entrant #16
Saber name: Cuprum
Specs:
CFV 4.31
LED Lux V blue Bin 4
2x AV switches, 1 blue ring illuminated, idle LED and main power. 1Gold Plated Momentary Switch
Premium speaker
2x 14600 li-ion power supply
In-hilt recharge with custom copper kill key
Real quartz crystal in chamber
4 HB 5 mm accent leds: 1 cyan and 1 blue in pommel. 1 blue (always on) & 1 cyan in crystal chamber
Trans White PolyC 36" blade with pointed tip
Emitter by Arm on Fire.
Soundfonts
SoulReaver ~ Shadeslinger
Zen ~ Novastar
Starkiller ~ Novastar
Episode V remastered ~ Novastar
Resblade ~ Novastar
Rainsizzle ~ Novastar

[ARKM]

All of the MHS hilts are awesome. Good luck to everyone.

[JamoUp]

Some of these don't look like MHS sabers. Well done!

[DJMoonbass]

im pretty sure i know whos 8 is. and boy its beautifull. these sabers are such awesome, amazing works of art. well done everybody. just gorgeous. theres to much talen in this thread LM....

[Eco]

The only thing I don't like about this thread is that I don't have anything in there!
XD

All these sabers look amazing, I honestly am torn about who to vote for!

[Invisas1979]

I know who 4's is and could def guess two others 11 and 16 just by previous threads and designs.

I have no idea who's 8 is. I don't believe LDM or LM were in on this so this only leaves an handfull with the skill to do something as good as that. My money is on one of two however.

Can't wait to see who's it is.

It's close for 2nd too so that will be interesting.

[Sloda Foade]

Well I missed my entry by 4.5 hours, but wow what a selection to choose from. all are so good that I took a long time to decide. Congratulations to all the contestants and best of luck

[Crystal Chambers]

Actually second place is in part 2 of the MHS polls and has been holding 2nd by quite a lead.

I also recognize several build styles here but some of them really make me wonder. I'm pretty sure LM isn't in cuz he's running it and for some reason I think LDM said he wasn't entering but only LM knows.

[Lord Dottore Matto]

I did not enter. Empirical was going to be in, but I could not hold off posting because Lord Dracus had waited long enough. I do know who made a number of these sabers and most of you will say "Duh..I can totally tell!" when all is revealed, but don't forget to look at the second poll because there is some wonderful work there as well!

[DJMoonbass]

IMO they kinda had an advantage of being in a second pole... im sure people have voted twice in MHS... but oh well. these sabers are just so awesome. i am just in love with number 8. so inspiring. and the pommel insert is to DIE FOR