Results 1 to 10 of 108

Thread: Basic Saber Build list of parts

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Council Member
    Sith Lord
    Lord Dottore Matto's Avatar
    Join Date
    May 2008
    Location
    On the Black Mat
    Posts
    3,289

    Wink Basic Saber Build list of parts

    Okay, My head is ready to explode reading the posts by lazy people who want to be spoonfed, so I'll tell ya what I'm gonna do (no, not take out Mafia hits on all of you), I'm gonna SPELL it out right here!

    If you follow this tutorial, you WILL end up with a BASIC working LED MHS lightsaber!

    Step 1:

    Choose a LED blade holder from this link--->http://www.thecustomsabershop.com/Bl...lders-C32.aspx

    Make sure to select it WITHOUT a heatsink module!!!! (you can buy it with or without, but you will be getting one in step 5.)

    Step 2:

    Buy this blade retention screw--->http://www.thecustomsabershop.com/8-...rew--P111.aspx

    Or this one: http://www.thecustomsabershop.com/8-...crew-P538.aspx

    It can be cut later if it is too long for your particular blade holder.

    Step 3:

    Choose a Hilt (style 1 thru 4) from this link--->http://www.thecustomsabershop.com/Ce...tions-C33.aspx

    These have pre-drilled switch holes and female threads at both ends. It is the "handle of your saber". Don't get bogged down with chokes or extentions or any of that crap! We are going SIMPLE here!

    Step 4:

    Choose a pommel, one insert and one clip from this link--->http://www.thecustomsabershop.com/Pommels-C34.aspx

    This will be the "end cap" assembly of your saber. Just pick the ones that you like (one of each).

    Step 5:

    Choose this basic LED Module --->http://www.thecustomsabershop.com/Re...dule-P653.aspx

    If you chose a RED or Orange LED, you will need this buckpuck---> http://www.thecustomsabershop.com/Bu...wire-P363.aspx

    If you chose any other color, you need this one---> http://www.thecustomsabershop.com/Bu...wire-P364.aspx

    You will need a 7.4V battery pack to power either of the above buck pucks. You can use something like this---> http://www.thecustomsabershop.com/74...Pack-P759.aspx

    Finally, you are going to need this switch---> http://www.thecustomsabershop.com/Pu...utton-P40.aspx

    This kit has ALL of the BASIC electronics that you need! Don't get all crazy with extras! Build this one first and you can add sound to it when you know enough to do so!

    Step 6:

    Buy a 36" blade, this is the best one for a beginner--->http://www.thecustomsabershop.com/LE...-OD--P227.aspx

    It is bright and YES, you can battle with it!

    Step 7:

    Tools you MUST have to do this project include:

    1. Soldering Iron (Here is a link to a nice basic kit with EVERYTHING you will need!)--->http://www.radioshack.com/product/in...ductId=2062758

    2. Heatshrink (1 foot is more than enough)--->http://www.thecustomsabershop.com/18...ubing-P32.aspx

    3. PPE (personal protective eyewear), goggles, etc. You don't want to burn your eyeballs out with flying solder do you!

    4. Drill and tap set--->http://www.thecustomsabershop.com/8-...l-set-P52.aspx

    Used to drill and tap the hole for the blade set screw. BTW, you need a hand drill too!

    5. Tap handle--->http://www.thecustomsabershop.com/Tap-handle-P54.aspx

    Used to hold the tap while you tap the hole that you drilled for the blade retention screw.

    Step 8:

    Order all the "stuff" from steps 1-7

    Step 9:

    Don't visit the forum again until you get all of your stuff in the mail, you'll just confuse yourself!

    Step 10:

    Follow the basic MHS assembly tutorial--->http://forums.thecustomsabershop.com...read.php?t=326

    Drill and tap your blade retention screw hole and add the screw!--->http://forums.thecustomsabershop.com...ead.php?t=5724

    Step 11:

    take a few digital pictures and upload them to--->http://www.photobucket.com

    and then post them here for all of us to see!

    Step 12:

    Read, Read, Read and in no time you will be building more advanced sabers! (and the questions that you ask won't get you flayed alive!)
    Last edited by Forgetful Jedi Knight; 07-15-2014 at 06:20 AM. Reason: Updated electronics links. 7-15-14
    All n00bs READ these first (PLEASE)!!!:1. LDM's Basic Saber-build Step-by-Step Tutorial 1A. Maul's Saber Dictionary 1B. THREAD INDEX 1C. Econo Sound Diagrams
    TCSS the #1 Part supplier of LDM customsabers!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •