Noob start list

[Darth Mikis]

Hello i was making a saber on TCSS and wanted input on if everything looks alright and if i should need or get anything else with it..all of the items are from the TCSS store, so here is the list:


Hilt style 2 with guarded style switch hole
MHS choke style 1 long
MPS Pommel style 3 v1
Screw on LED blade holder style 11
MPS Clip
MPS Insert style 1
LED "TCSS style" Battle blade 1" OD (36 inches)* ** Bullet Shaped
Build Your Own Seoul P4 Electronics Kit
* 4AA Battery holder
* Seoul P4 (Red)
* Collimator Lens 5° viewing angle
* 3.3ohm 5w resistor
* Push on/push off switch with red button
* Luxeon III/V Lens Holder

Powder Coating Powder Coating (Solar Flat Black, PM31)
Powder Coating Powder Coating (Solar Flat Black, B111)
Powder Coating Powder Coating (Solar Flat Black, C1L2)
Powder Coating Powder Coating (Solar Flat Black, SH23)
DPDT Latching red illuminated switch
Machine switch hole in MHS section (illuminated)
location: main body, Hilt style 2 with guarded style switch hole
***edited***

Drill & Tap Hole
Drill & Tap Hole (8-32)

location: blade holder to secure blade....

8-32 x 3/8" button head screw


Do i need anything else? or any other suggestions, such as quick disconnects, 5 or 10 degree collimator, i dont want sound as of now...

[Darth Xusia]

Are you goine to drill and tap the blade set screw yourself?

[Darth Mikis]

ah i c, i will throw that on there, how does the rest look?

thanks, for the look over too...

[Darth Xusia]

Looks ok to me but I'm pretty tired lol

[Jay-gon Jinn]

The list is pretty good, but I see one thing you'll need that isn't there....a bezel or box for mounting the DPDT illuminated switch. Those are too long to fit in an MHS hilt by themselves.