Parts Check

[Shadar Al'Niende]

Ok ok, I may not be a new guy...but i still am paranoid about missing things on my order...so here goes

MPS Pommel style 4
MPS Insert style 6
5" Fluted double female threaded connector
MHS choke style 3
Screw on LED blade holder style 12
4AAA battery holder
Seoul P4 (White)
Luxeon Collimator Lens 10 deg viewing angle
Luxeon III/V Lens Holder
Various PC'ing Work...
Switch Hole Service
AAA 1000mAh NiMH Rechargeable battery (x4)
1" Thin walled Polycarbonate 40" long (28 inches +$0.50)
Shouldered 1" thin walled blade tip with reflective disc
Blade film (Quad wrap +$9.00, 1" Thin walled)
Push on/push off switch with black button
Premium Speaker
2.1mm Power Jack
Power jack kill plug


Couple of things to note:

This is for my wife so the Hilt is going to be smaller as is the blade.
I hold the pommel insert in with glue
I have a MR FX Obi I am gutting for sound thus the latching switch

The image below should give you a good idea of what i'm wanting to do. Some of the details will be different since this was an early design... (the image is clickable just because i can )

[Crystal Chambers]

Good call on the list..I'm the same way. When you're ordering from away you wanna be sure you don't overlook or miss anything. I often add in a few just in case items when I can.

blade retention screw
covertec or d-ring maybe

Since you're making your own blade maybe trying a mirror for a 3/4" blade to let light out around to the tip. I have a bunch of them but haven't tried it yet.

Are you planning any overlays? I must say the MHS sleeve material is really nice to work with and the sinktubes here are the best quality I've seen for a great price.