Ok, so thinking of giving trustfires a whirl on advice of others.
Some questions I'm having trouble finding answers for and would appreciate the guidance of the Masters.
I've read through this and other threads:
http://forums.thecustomsabershop.com...ead.php?t=9546
For now my builds are using LUX3s and P4s. MR or Hasbro Econo boards.
I've been told that a single 18650 is my best option. T/F?
True
If so, can I follow the tute above and just wire up the same way with one battery? Assuming there is not a holder to fit the 18650s....
I am not ready to tackle a recharge port yet. Would go with a disconnect/charger set up. If I wire up as in the tute, will I be able to recharge using
http://www.thecustomsabershop.com/Tr...rger-P346.aspx ?
No. In order to use this charger, the batteries (at least in theory) have to be removable. There are ways to jury rig it to work since you're only using a single trustfire, but that would require some...uh...creative wiring solutions. Better to get the more expensive Li-ion charger in the store or just find a battery holder that fits the trustfire.
I can't see how the batteries would fit in there with the wires soldered on?
The connectors are just purchased at a radio shack? Anything special I need to know on that?
Finally (for now!), any resistors etc. issues I need to be aware of if I use the 18650?
THANK YOU in advance!
Bookmarks