Cannibal869 presents an office saber

[cannibal869]

Hey again everyone!
I had a bunch of left over spare parts - I think this happens to all the builders after a while
Anyhow, I thought it'd be cool to have a saber I can mount in my office at work.
I have a couple of those Star Wars collector's mounted and framed film cell displays and I was thinking,
what if I mount a blade to the wall behind the film cells? Then when they come into my office, if they want to
look at what film cells I have, they can just turn on the blade and voila! Instant backlighting!

With that in mind, I present to you my latest creation...

Specs:
MHS Screw on LED blade holder style 19
MHS choke style 2
MHS hilt style 4 with guarded switch hole
MHS Screw on LED blade holder style 10
12mm lighted momentary switch
MR Yoda Soundboard
eastern57's Lighthound flashlight PCB (momentary switch to latching switch converter mod)
ARKM's razor blade plug with a 5mm accent LED



Close up of the 12mm lighted switch (off)

Profile / Side view of the 12mm lighted switch

lit up without the blade plug

Close up of the pommel (blade) plug lit up



thick walled blade with bullet tip and 4.5 ft of polypropylene inside. Using Lee Filter Oaklahoma Yellow.


Enjoy everyone!
-Chris