Will this fit in a 5" extension?
Just want to make sure these will fit before ordering. Will a 4AA holder fit in a 5" extension with a speaker holder? In the shop, it says the 4AA holder will fit in a standard main body, but I can't tell if this will fit with the speaker holder, taking the threaded sections into account.
Thanks in advance.
It will fit fine in a 5" extension. You could use a 4" as well and be fine.
Aluke123 on every other forum - Old grumpy moderator here
Thread Index, The Saber Building Dictionary, and The Basic Saber-Build Tutorial - Read Them!
Awesome, thanks for the speedy reply
if you wanted to save even MORE room you could go with 4AAAs
Why would that save more room? I figured that since aaa's are the same length as aa's a speaker sound combo would be roughly the same length???Originally Posted by DJMoonbass
if you wanted to save even MORE room you could go with 4AAAs
Obi-Wan: "If you spent as much time practicing your saber techniques as you did your wit, you'd rival Master Yoda as a swordsman"
Anakin: " I thought I already did"
Obi-Wan: "Only in your mind, my very young apprentice"
Um, AAAs are about 1/4" shorter than AAs.
I don't know why you think they are the same length.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Also, the quad pack AA holder will NOT fit in MHS with batteries in it. Only the longer 2x2 set up will fit. And that one, wont fit in a 4" and might not even fit into a 5". This may be a better job for AAA's.
If you're new, please take the time we all consider just as precious as you and READ!
GET LATHED!
Official BMF and LORD OF THE STRINGS
Yeah, I don't know what's up with LM's post. He must have misread something.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
invisias, J LO.
guys. gosh think about it for cryin at loud! the 4AA are two battery lengths long. so its a long battery pack. the 4AAA are only 1 battery size long. i think common sense would come into to play here.
Last edited by DJMoonbass; 02-02-2010 at 01:09 PM.
Why are you bringing my name up for eye rolling, DJ? I didn't say you were wrong.
I know the 4AA pack that will fit into MHS parts might be too long for a 5" section.
I was pointing out that Invisas was wrong by him saying that the AAA batteries were the same length as the AA, and that LM was wrong about the 4 AA holder fitting into a 4" section.
I know that the 4AAA pack will fit with a speaker holder.
Some people like to use AAs for longer run times.
The 4AA pack will fit into the 5" section unless he means that he doesn't want it to go past the threading, in which case, it will not.
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
Posting Permissions
Reply With Quote
Bookmarks