Add-on board for adjustable LED driver schematic

[Strydur]

[Crystal Chambers]

clash switch? So it's not a sensor it's an extra switch? Since it has 2 settings for mom or latching how would this work? Or does this work like US with the momentary?

Make sure I've got this straight. So with the add-on I'll have ramping on activation and shutdown, pulsing/shimmering, and clash flash? Not like the clash flash we see on CF?

I'm guessing the only advantage to this is the other driver has only puts out 1000mah where the other is adjustable right?

[Strydur]

You can use a momentary switch or a clash sensor for the flash on clash. I am not sure how well the clash sensor works with setup..sensitivity, etc..

You can select either momentary switch setup or latching switch setup..just depends what type of switch you want to use.

With this combo you have all of the old driver specs but with selectable mA output.

[Rhyen Skytracker]

What determines what type of switch you use? Latching or momentary. Is there a dip switch or something?

[FenderBender]

Its probably a firmware thing, like the original driver board.

[Strydur]

We sell them both ways.. you order a latching or a momentary.