Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 38

Thread: Add-on board for adjustable LED driver schematic

  1. #1
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default Add-on board for adjustable LED driver schematic



    Tim
    The Custom Saber Shop

  2. #2

    Default

    clash switch? So it's not a sensor it's an extra switch? Since it has 2 settings for mom or latching how would this work? Or does this work like US with the momentary?

    Make sure I've got this straight. So with the add-on I'll have ramping on activation and shutdown, pulsing/shimmering, and clash flash? Not like the clash flash we see on CF?

    I'm guessing the only advantage to this is the other driver has only puts out 1000mah where the other is adjustable right?
    Last edited by Crystal Chambers; 02-09-2010 at 11:35 AM.

  3. #3
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    You can use a momentary switch or a clash sensor for the flash on clash. I am not sure how well the clash sensor works with setup..sensitivity, etc..

    You can select either momentary switch setup or latching switch setup..just depends what type of switch you want to use.

    With this combo you have all of the old driver specs but with selectable mA output.
    Tim
    The Custom Saber Shop

  4. #4
    Council Member
    Jedi Council Member
    Rhyen Skytracker's Avatar
    Join Date
    Feb 2009
    Location
    Covington, GA
    Posts
    2,550

    Default

    What determines what type of switch you use? Latching or momentary. Is there a dip switch or something?

    Live long and...I mean May the force be with you. http://saberconcepts.50.forumer.com/index.php

  5. #5
    Council Member
    Jedi Master
    FenderBender's Avatar
    Join Date
    Jul 2008
    Location
    Earth System - Rhode Island
    Posts
    1,531

    Default

    Its probably a firmware thing, like the original driver board.

    If you're new, please take the time we all consider just as precious as you and READ!

    GET LATHED!

    Official BMF and LORD OF THE STRINGS

  6. #6
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    We sell them both ways.. you order a latching or a momentary.
    Tim
    The Custom Saber Shop

  7. #7
    Council Member
    Jedi Council Member
    Rhyen Skytracker's Avatar
    Join Date
    Feb 2009
    Location
    Covington, GA
    Posts
    2,550

    Default

    Tim, are you planning on offering a mounting solution for these cards?

    Live long and...I mean May the force be with you. http://saberconcepts.50.forumer.com/index.php

  8. #8
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    Both of these cards will eventually be sold as one unit so I am waiting until then to come up with something.
    Tim
    The Custom Saber Shop

  9. #9
    Council Member
    Jedi Council Member
    Rhyen Skytracker's Avatar
    Join Date
    Feb 2009
    Location
    Covington, GA
    Posts
    2,550

    Default

    That is what I was waiting to hear. Do you know how much you will charge for the single unit yet?

    Live long and...I mean May the force be with you. http://saberconcepts.50.forumer.com/index.php

  10. #10
    Jedi Initiate vargose's Avatar
    Join Date
    Jul 2008
    Location
    St. Louis, MO
    Posts
    393

    Default

    I wonder if there is a way to use this without the adjustable LED driver. Like maybe using a resistor instead. ???
    Last edited by vargose; 02-10-2010 at 02:27 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •