Prepare to be Overwhelmed!
My fist Saber build will be Wednesday when my parts arrive
Good luck and have fun!
Dave
AKA: Damin Kestler
Prepare to be Overwhelmed!
My fist Saber build will be Wednesday when my parts arrive
Good luck and have fun!
Dave
AKA: Damin Kestler
addiction? you can say that again, I was 2 seconds away from just soldering some wires together for no reason last night. But i just filed my taxes, and it looks like after i book my room and buy my tickets for celebration V I will be buying stuff to make a better saber
yea LDM already touched on it, but your saber has no optics to collect the light from the LED and focus it up in a beam, that is why you have the problem. For your first attempt and budget its a nice start!
I <3 Mako
Sorry for being sure a noob, but what are optics exactly? I have a flashlight reflector my LED's sitting in. I also have clear gift wrap in the blade, if that's what your talking about. But like i said i don't know what optics are exactly.
This is what optics are:
A lens:
http://www.thecustomsabershop.com/Lu...-angle-P5.aspx
And a lens holder that seats over the LED star and holds the lens at the right orientation and distance from the LED
http://www.thecustomsabershop.com/Lu...older--P7.aspx
High powered LEDs look like this:
The domed part in the center is the actual LED, it's mounted on a star that has solder pads that you solder your wires onto.
Now, go do some more reading.
Lots and lots of reading, so you don't ask anymore totally noobish questions like this. Ok?
In order to see the Light,
you must sometimes risk the Dark.
TCSS MODERATOR
BLUE 8 Ready to ROCK and ROLL!
I was asking if i was right
I have read
I have that
and im out, last post.
Thanks for you helpful ppl
Bookmarks