Results 1 to 10 of 18

Thread: ARKM blade plugs (REVIEW)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default ARKM blade plugs (REVIEW)

    (NOTICE THE IMAGES SEEN HERE ARE OF PROTOTYPE PIECES. FUTURE MODELS WILL HAVE NO MARKINGS OR ETCHINGS ON THE SURFACE.)

    My blade plugs arrived in a nice padded envelope two days after I placed my order (There's definitely something to be said for speedy shipping.) When I opened the envelope I found two bladeplugs just as I had ordered, both had a PVC cap electrical taped over the Head portion to protect against dings or crush accidents.



    When I took off the caps I was immediately impressed by the quality of the parts themselves. Each was approximately 2 inches long and consisted of a piece of 1" polycarbonate, a white machined disk (that acts as a diffuser), an electric razor head, and a machined ring that sits around the head to make it 1"od.







    Excited, I grabbed my converted ESB Vader and decided to try them on for size. Immediately I noticed a couple things: I was going to have to do some sanding for the plugs to smoothly fit into my blade holder, And they were definitely too long to fit into my blade holder. Now I should note that I purchased my conversion from The Custom Saber Shop so I'm sure it has different tolerances than the ones that ARKM makes.

    With very minor hand sanding with 180 grit sandpaper the plugs slid smoothly into and out of my emitter. Now on to length... I stated that the plug was too long but I think this approach is best because its better to have too much than not enough. I trimmed off about a half an inch with standard pipe cutters because I wanted to be able to have mine sit inset a bit.



    once I had all my modifications complete I dropped the plug into my saber and fired it up. The pics that ARKM presented originally as well as the ones I am presenting are deceiving because the light appears to be really bright and "blow out" the details of the razor head. There is a very even solid color to the plug and it lights up beautifully when on.

    The following Photos show the separate heads and their respective looks. I originally preferred the Norelco with one ring to the Remington with two but after having time to see and play with both I have changed my mind and really have to say I like the Remington more.








    May the force be with you!
    Last edited by Mobius; 01-22-2010 at 01:23 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •