Results 1 to 3 of 3

Thread: MR speaker to premium wiring question

  1. #1

    Default MR speaker to premium wiring question

    Ok, I have done the reading and am still doing the reading so if I missed the answer to this some where pls just pop a link to that thread and I would appreciate it. Now thatís out of the way.

    I am hooking up a Lux3 to the sound board that I removed from a 2005 MR anakin. My question is not with the led but the speaker. I am switching out the 3AA stock bat pack for the 4AA bat pack w/premium speaker.

    I believe I read some where that the MR speaker is a 1/8w while the premium speaker is a 1w (may have this back ward iv been doing a lot of reading over the past few days.) so if I wire like the following is there any thing I need to put in the circuit still like resisters. I donít want to blow the speaker or dmg the board.

    From board to Battery w/speaker (the 3 wires leaving the board to the 3 on the 4aa bat combo)
    Neg speaker to Neg speaker
    Neg Battery to Neg Battery
    Positive Bat/spkr to Positive Bat/spkr

  2. #2
    Council Member
    Jedi Council Member
    Jedi-Loreen's Avatar
    Join Date
    Dec 2005
    Location
    Not of this Earth
    Posts
    6,077

    Default

    No resistors needed, you won't blow the premium speaker.

    There's also no polarity to the solder pads.
    In order to see the Light,
    you must sometimes risk the Dark.
    TCSS MODERATOR


    BLUE 8 Ready to ROCK and ROLL!

  3. #3

    Default

    Thanks thats what i needed to know

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •