Yep, I've been playing for a while now; and already recharghed the battery twice :P
With the LED mixing it is interesting because they do NOT have the same intensity; I did get a color mixer app on...
Type: Posts; User: darthdarth
Yep, I've been playing for a while now; and already recharghed the battery twice :P
With the LED mixing it is interesting because they do NOT have the same intensity; I did get a color mixer app on...
Yes, I did read the manual and it lack some info; like some of the options in the SD card config files, or what the other 2 txt files in the root of the card does (I assume one is just for reference...
I see, I thought that at least the switch could be used for lockup or blaster deflection.
There is a silent mode, which imply that you can press the button for a certain time, and do a different...
Finally I was successful in making this to work :)
It did help a lot to re-route the wires; due to the extender, but now it works fine. BTW in my config, I have green L1 Blue L2 and Red L3; so I...
No worries, I understand that would make sense for a newcomer to start with something easier. Although I do not have the disposable income to build multiple sabers, so I had to go for the one that I...
I see; going for these youtube videos then. I did get the goth3d chassis, so I hope it will help. Thanks!
Well, I did buy a graflex-clone in blue, so since this was my build, I went for the route of customization as main thing. With the RGB I have the freedom to run any of the major colors, without being...
I have to take apart the whole assembly first; probably I can even snatch the resistors at the end of the assembly, although the battery channel is quite small, so probably won't work.
I did make...
Thanks for the video, Tom!
So you used the space behind the speaker too; that is useful for the resistors. Yours are much smaller than mine...I did get them at the CSS, but they are huge; so I...
Awesome Tom!
How did you join wires together? I have virtually no space on top; especially because the resistors are so big and take so much space.
Also I have no idea where to put the...
Thanks for the hints; I did learn the hard way that I should follow what is on the manual; although I can't just read it without understand :P
If you try to connect the positive of a LED to the...
Update: I did wire up everything, and....the LED assembly does not power up.
At this point I realize that the issue is in how the wiring has been done; the board power up no problems, although it...
I see; I am not much into electronics; I mostly write programs for microcontrollers, leaving the wiring to the people that know that well :)
Does my schematics works or do I have to change...
This is what I did plan; not sure if that's how it should be though...
15689
In many examples, I see people setting up the positives together, instead of the negatives, which is weird to me. I...
I thought that diagram was wrong, when I was looking at the manual.
Not sure why it has to go through the activation switch; I want to be sure that I do this right, since there is no turning back :)
Hi guys,
Finally got all the material (and time available, so I started the build.
I did mount the LED and the inner frame, The battery is in and I did put together the recharge port; so now I...
Got it; I did try to wire up the LED using a switch, so I could have red as main color, and purple on flash; and on another side, green with orange on flash, so I use only 2 channels at time;...
Thank you so much! I am going crazy trying to figure this out...I did see some videos of how to mix colors to get different shades, and I thought that it was something that you can change on the fly;...
Hi guys,
I did order from the store a Custom Tri-Cree LED with RGB colors and the NB V4 board.
Now, the issue that I have is about how to actually wire the led assembly to the board. I did go...
Hi all,
I am a long time SW fan, but was never into lightsabers, since I am not a fan of static props, and the few on the market were mostly toys (talking about the 90s and 2000s). Finally tech...