Hows that I found out that one can handle up to 6.2 because its rated 2C is it different with 2 in series?
It should stay the same right?
Type: Posts; User: Marco
Hows that I found out that one can handle up to 6.2 because its rated 2C is it different with 2 in series?
It should stay the same right?
I was wondering how much max discharge the Li ion packs from the shop can handle?
Specifically 18650 packs that are rated 2600 mAh...
I want to power two dice in // @ 1A each like = 2A + 1A for...
Hahaha Zahc Zi Phan
Thanks alot so finally I have a setup that will work or at least should work!
Btw.: I have panasonic 18650 they are rated 3100 mAh and I am driving two green dice in // each...
Hm I found this --> http://imperialroyalarms.proboards.com/index.cgi?board=lightsabers&action=display&thread=868 how is that possible?
As the topic indicates I was wondering if the activation box style 2 lifts up the shorter AV switch (2 cm/0,8") high enough so that 18650 (inside the chassis disc) will fit under it?
To clarify...
I posted this thread before anything has been answered on fx ... Thats also why I wrote they have been answered... Check the time of the various posts.
But thanks alot for the detailed answer...
Its not already been answered... :D
Is it true that the pex will draw 2A anyway no matter what resistor I use so setting the CF to 2A will exceed the batt max discharge of 3.5A, because 2A pex draw and 2A CF main blade draw???
Nice so its a correct calculation 3500 mA max discharge - 2000 mA = 1500 mA left? :) (5 watt ok too dont want that it gets to hot?)
Alright I would have 1500 mA left for the FoC dice since 2000 mA is already been drawn and the max discharging current of the battpack is 3500 mA? (3500 - 2000 = 1500)
Can you give me a resistor I...
I want to wire a RGBW LED using a CF to produce a FoC. RB for Purple main blade and W for the clash.
Battpack is 7.4 v 18500 1400 mA 3500 mA max discharge...
Just a few questions:
In a...
so actually it could be an advantage because it will be less hot nice thanks skott if my saber staff is ready you will be the first to know! :D
one lil q... there is no such thing as too much watt right? if the calculator says 33 ohm 0.125 w I can use a 33 ohm 0.5 w resistor without any problems right? the led wouldnt be less bright or...
its also possible to solder it to the switch right and not directly to the board? I dont want to solder it right on to the board...?
How much watt?
kay I thought the led might hanlde the 0.5 v that are too much because it gets less mA than needed... :)
Hey all,
as the topic indicates I want to wire illuminated switches on the accent LED pads of a CF. (To use them as switches and accent leds at the same time... ;>)
The manuals says the CF...
Did it thanks to all :D
Thanks Mandalorian I really appreciate your and everyone elses effort :)
Okay thanks to all for the detail replies!
So its just a matter of personal preference I guess... Where would you put it? Any suggestions are welcome :D
Hey there,
I just have a quick question that hopefully someone experienced can answer... :)
I want to tap a hole for a blade retention screw in the blade holder style 16 and was wondering where...
thanks for the check :)
one more little confirmation...
Will this work --> 5896
Thanks in advance...
:)
Soo awesome!
awesome do you have and dos and donts for wiring a pack up? I really dont want to blow my face of... :D Like only applying heat from the soldering iron for 5 secs max. or something like that? :D (is...