Sorry I haven't responded, been rather busy as of late. Anyways, yes the battery (@3/4") will fit in the blade holder (7/8"). Just make sure you leave enough room for the wires to from the led to...
Type: Posts; User: RoninBJJ
Sorry I haven't responded, been rather busy as of late. Anyways, yes the battery (@3/4") will fit in the blade holder (7/8"). Just make sure you leave enough room for the wires to from the led to...
Nothing as of yet...
Thanks, the biggest difference is I removed all the brass nuts and put silver ones for some contrast.
I did get access to the lathe I mentioned above! I ran some hard...
So I will be starting my second build soon, and it will include 2 separate crystal chambers...
I have been fiddling with some parts putting together different chambers over the past few days and...
The Graflex Chassis disc will not work with this kit, I had to purchase the MHS chassis discs instead. If I were to do it again I would either grab one of the 3D printed chassis with Crystal chamber...
Hey man,
Sorry I have been busy and haven't responded. I did have the 7/8 heat sink linked originally but I took it down because I realized it was against the rules. But I think I can safely say,...
LOL, Just FYI it doesn't seem like Justin is going carry anymore of the 7/8 heatsinks... I have a new Darth Maul I just received that I need those darn heat sinks for! But I have read, somewhere,...
I wouldn't do any thing to the hilt itself, more create parts to make a fully in-cased chassis and make some custom pieces for a crystal chamber and full reveal chassis.
Yes I opened up the hole in the top of the speaker holder to allow the battery to sit just above the speaker. If you can get the battery into the blade holder you should have plenty of room I would...
https://www.youtube.com/watch?v=GnotZQmgFak
So just another quick video, the blade is really something.
I sanded down the screws to allow for a little bit more room for the chassis, I'm not...
I will take a few pics and post them of my chassis when I get home from work. Plus VV blade came in the mail today! But essentially my chassis is not connected to the blade holder. It is merely...
You both are welcome, let me know if there is anything else I can help you with.
Looks great!!! I really like the printed circuit board (gold and green?). Are you going to wire the red button...
Lower part of the hilt is about 1.25" in diameter, only the blade holder is 7/8" in diameter. So you can use a 28mm speaker no problem in this build. I personally used the 2w 28mm premium in my...
I used a T6 and T7 not sure if you would call it a hex or Allen wrench, more of a star shape key.
No problem, I am here to help!
The other screws are all hex/allen wrench.
Here is a short video about the few question asked earlier. Much easier than taken a bunch of pictures and then writing descriptions for each one... If there is anything else please let me know!
...
Thank you, and good luck! Just purchased a new project today DM1 (Darth Maul Staff Saber) from Korbanth, super excited about that one as well!
Thank you! I am glad my thread can be of some...
Added some custom boot sounds! I am currently working on some custom ignitions/swings/clash, but here is a little sample of my new boots.
https://www.youtube.com/watch?v=NC8lcjU0O28
That is awesome! Where did you find those parts?
Power extender was sold out. And I wanted to start building immediately, so basically my own impatience...
Rob P. is the previously mentioned Rob (Madcow)
If I have some time tomorrow I will go back to the hardware store and take a picture of the item code and post it here.
I have two different plugs I made one is a copper coupler and sweat...
I was looking at the fx Kylo for the longest time, but then the graflex saber kit popped. I am seriously thinking about ordering the Kylo ren hilt that korbanth made as well but $$$$. It good you...
Dude, it took me 4 different stores and a lot of time searching threw bin after bin. I was so happy when I found them I let out a pretty loud F*** YEAH that I turned a few heads... But hey you know...
I'm glad my thread helped you out! If you have any questions please ask away. Here is the LINK to the resistors I used; and as far as them going a certain direction I have no idea... Either they...
Yeah, I think your brass dowel might be different than mine. Looking at your pics it seems that there are small holes in the prongs, am I correct?