Search:

Well, if we are talking about a 28mm bass speaker, then it is pretty common that a very hard hit (or many repeated hits) may detach the magnet from the speaker assembly.
In this case the symptom is...

Initially, when looking for information about these modules, I found descriptions that were suggesting the load was separate from the battery, making possible to skip the switch.
Deepening the...

When using these USB charger boards, always include a switch to cut power to the board when charging.
If you leave the NB (or other boards) connected while charging, it will absorbe current and...

It's a 60/40 0.7mm cored solder.

I'm in Milan, bring my regards to Paolo and Krauss :)

Actually I can't remember the size of solder I'm using, I bought it many years ago.
If you really want to know I must check.

And, obviously, no problem at all in helping you if you need.

Hi TankReady

I normally use 0.14mm2 wires for all my builds.
You can find them easily online, once I bought some good ones from a scale train modeling web site.

And, by the way, what LS...

Technically the solution works, but has something to be taken into account.
The majority of the potentiometers does not support currents up to 1A, which is pretty common with the LEDs we use today....

A common workaround for this problem is to install a Power Xtender in parallel to the LED transistor do double the power rating.
If you look around here or at FX-Sabers you can find the instructions...

Yes, those are the jumpers, if you remove them you can wire all three dies directly.
I see the PCB already has +/- signs for proper wiring, the correct +/- pairs are the pads on left and right of...

Post a close-up picture of your led, perhaps there is a chance for any easy fix.
Sometimes the tri-LED PCB have some jumpers to connect in series the LEDs, removing could possibly solve your problem.

Very nice saber.
I love the design and the way you integrated the different part in different materials giving it an unique look.
Bravo !

Nice saber, everything seems to be perfectly matched.

After many years at the academy, I came to the conclusion that sooner or later the tip will fly off.

I have seen several attempts to solve the problem, from increasingly stronger glue to metal...

I guess your problem is the switch LED wired to that capacitor, I got the same problem in the past as well.
I think it depends on the revision of your NB v.2 and there are a couple of solutions...

Some years ago I converted a couple of 5 euro mini flashlight replacing the 3mm leds array with a single Cree XP-G white and the result is definitely good.
I still carry them around, one in the car...

What do you want to achieve with the two push buttons ?

- activate the saber only if the two buttons are pushed together
- activate the saber with only one of them, just different positions on...

Nice hilt, I like the simplicity of its design.
It's very interesting your solution for the chassis, clever idea.

Well, I'm not wiring a Ledengin since years now and I'm at work, but looks like you are picking the wrong pads.
As far as I understand you want to have two dies for the blade and one for FoC.

The...

Actually the NB is designed to work at its best with a single LiIon battery (3,7V).
Using a 4.8V NiMh battery pack can exceed the maximum voltage accepted by the card.

If you want to use the NiMh...

Very nice saber.
I really like sabers with a slick and effective design and this is a very good example.

Wow, this is a really nice PVC build.
Most impressed !

My trick to solve this problem is to unroll the film inside the blade.

It's definitely easier to show the process rather than explaining it, but I'll give it a try.

Once you put the film inside...

If it's the same as here in Italy, you will have hard times finding policarbonate tubes in standard shops.

After a lot of searching we managed to find a small company that is extruding the tubes...

Well, I believe you can be proud of this saber.
The design is clean and flows very well, I like it very much !

Very nice saber.
I particularly like the use of the trim ring and one of the very short pommels.
The result is really peculiar.