You change the parameters in the config file and save it to the sd card. Check out the manual.
Type: Posts; User: Meatsweats
You change the parameters in the config file and save it to the sd card. Check out the manual.
CF8 does not support neopixels
Yes NBv4 will work. Battery is soundboard dependent, nbv4 only uses a 3.7v. So get one of the 10a 3.7 18650 from the shop.
Control is through soundboard settings, each is different but you essentially change the r,g,b values and save that as a preset.
1. Yes. Some have a fourth white die but we don’t use those.
2. Yes, infinite rgb
3. Yes. Right now Plecter NBv4, Prism 5, and CFLS. NEC boards. Proffie/Teensy. Some other lesser known ls too,...
I trim the strips on each side a mm or two. TCSS clear thin walled tube, TCSS firm diffuser, foam tube, a couple feet of cellophane.
Just to point out. I’ve tested various strips and 5050 is brighter (actual) than 3535 via lux meter testing. Something like green 2k v 3.2k or so. Perceived (based on our other convo) brightness is...
Ok, thanks guys. I did some searching and came up with Stevens Power Law and Weber-Fechner Law that explained this pretty well. Psychophysics, new field to me...
I’m trying to understand this. How would a 4 strip blade be only 10-20% brighter than a 2 strip blade? Assuming the battery and wiring can provide enough juice to the strips isn’t there a linear...
Trust me a lot of people have missed that step including myself. Lol
Did you bridge the pads next to LS as seen on page 34 of the manual?
28ga on the power lines?? Hmm.
I’d be interested to see someone tear a VV blade down and see what strips they use.
I’m sorry, the clips are KR Sabers? I’m not familiar with Gustavo. Are the clips themselves for sale somewhere?
What wire clips and belt clip are those btw
Ptfe is not required, more of a recommendation for high current builds
I didn’t see it, but I’m assuming a blade is on your list? Make sure you get the high amp 18650(10amp). I’d recommend ptfe wire too. I’m guessing the clamp rocker switch is Dmitry Shtoks? You’ll need...
Extremely helpful! Thank you!
Dude nice. Thanks for posting this. I’m in the process of getting all the stuff for the same build just with a proffieboard. How are the quillons diffused with the blade film? Do you see any...
I’ve build 4 neopixel blades and I haven’t used a capacitor yet. The only time I’ve had the leds act like that is when I messed up the wiring or the strip itself was bad. Maybe someone else can chime...
What battery are you using?
I don’t, no.
For neopixel strips you want a 1in clear thin walled, TCSS blade diffuser, couple feet of clear cellophane, and the closed cell foam tube they sell. That is the best(imo) to diffused strips and how I...
Oh please don’t put an av switch in the glass eye socket. Listen to Tom please :)
This sounds like a data line issue. Is the TCSS data line pads bridged as seen in the video by Rob? Also if using a Prizm did you bridge the ls pads on the board? Also, is ledstrip set to # of leds?...