Tim got back to me earlier and confirmed something I learned this past weekend, which is that the longer pin is the positive one.
Unfortunately (and foolishly) I removed the wires soldered to the...
Type: Posts; User: Jono87
Tim got back to me earlier and confirmed something I learned this past weekend, which is that the longer pin is the positive one.
Unfortunately (and foolishly) I removed the wires soldered to the...
16358
So these were all the markings I could find.
At first I thought the mark on the bottom might be a + but upon further review it looks more like a 4, most likely to compliment the LX up...
No, sir. That was my impression with the speaker wired, housed, chassised and in the hilt. I even put in putty per Madcow's recommendation to minimize any adverse vibration.
I'll definitely check...
Well, I guess I need to go back and check again. Hopefully the LED didn't get blown. :(
+ Power NB ----- Recharge/Batt splice ----- In End of DynaOhm - Out End of Dyna Ohm ----- Accent LED
The question I have is if the two prongs of the LED are interchangeable (as I recall having...
Follow up:
I went with this wiring scheme in the end.
16357
I successfully got the primary LED, Switch LED, Switch, and speaker functioning as intended.
On one level, I am happy I was able...
So probably better just to go with the 3 resistors then?
Hey guys.
So I've been doing some thinking over the past week, and really like the idea of a chassis/internal battery build after all. I did some measuring and believe I've got more than enough...
Dude, that's what I've been doing for the past two weeks. I'm not even going to pretend my design isn't a combo of stuff I've seen him do, because it is. It does however include a few things not...
Will do. Thanks guys!
Awesome. As far as the actual components, circuitry, and resistors, does the wiring design look viable, qualifying any ruling with the assumption that soldering is done competently?
Alrighty, Warlock. Posted the mock up above. Honestly, I'm planning on using 100% of my saber's pieces from TCSS. The pictures above are the parts I was planning on using. I'm not married to using...
Ah. As you wish.
16302
I've purchased two pre-made sabers before, and feel it is time to build my own.
I've become accustomed to sound in the sabers I've purchased, so while I know it isn't necessarily advised for a...