That's the one I used just wanted to make sure I was reading stuff right and wanted to double check
Type: Posts; User: Sidious_999
That's the one I used just wanted to make sure I was reading stuff right and wanted to double check
So if I chose to run at 1000mah on a 3.7 v battery I would need a 1 ohm resistor correct?
I take it that if u choose a lower mah to run at you will have a less bright led and longer life?
I know about ohms law, what I do not know is why there is a range and different Luminous Flux on the white cree. Is it so I can choose how bright I want it or? Also how do I know what forward...
For example, I want to use all red cree tri led, tcss says
Red Cree Part# XPEBRD-L1-0000-00901
80.6 Minimum Luminous Flux @ 350mA
Forward Voltage @1000mA = 2.59v
What does the 80.6 luminous...
Awesome thanks so much !!!
Hey guys it's been a long time since I've done this but my nephew wants a saber for his birthday haha. I see now the shop has the lens assembly with lens led heatsink eat all ready to be wired. Can...
YES this is what i was looking for ! thanks soooo much!
hi guys, its been a few years since ive been on here and wow how some things have changed.
im looking for any guides that relate to pvc hilts. My most common problem i can't remember is if i used a...
ok im sorry i overreacted and will really start reading now- sorry loreen didn't mean to go all dark side on you- lol
first off LOREEN- i did read it- and it doesn't help anyone for you to yell at me- just ignore my friggin posts if thats all you are going to do- and second off the words : almost 1" tells me nothing...
does anyone own this heatsink?
http://www.thecustomsabershop.com/Luxeon-star-heatsink--P220.aspx
wondering if it would fit in 1" pvc pipe with 1"OD and 7/8"ID
otherwise wondering what jaygon...
sorry but im getting confused-
i meant the diffuser-
im just kinda confused by cellophane-corbin film, and then the diffuser they sell- can you straighten this mess out for me?
ok - im making my lightsaber and only put cellophane in- its kinda dim so heres my question :
what exactly is this used for:
http://www.thecustomsabershop.com/Blade-film-P197.aspx
all it says...
but am i right with the right resistor and the right batteries- double and triple a batteries have 1.5v's right?
it doesn't answer my question because i was asking AM I CORRECT?
i know how to cross reference- im just asking if im correct- jeez
-doesn't answer my question
just to get this straight- say i wanted a blue lux 3 LED- i would go with this resistor:
http://www.thecustomsabershop.com/22ohm-5w-resistor--P11.aspx
and 4 AA batteries?
are there any videos of a corbin film demo?
and do you put the cellophane in first and then the corbin inside the cellophane- ? i dont see it in the tutorial on making led blades
is this the same thing as cellophane??
http://www.thecustomsabershop.com/Blade-film-P197.aspx
before you screaming at me for this question being asked- i used search and could not find it-
1. will using more cellophane wrap make the blade more evenly lit- i have heard it will and it wont
...
what would happen if i made a blade out of these?:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=320393900721
would it not light up right or would it be fine or would...
in this tutorial when Jay-Gon is making lines in the hilt with a tool, the same tool he uses for a cut piece of the poly carbonate so the LED wont fall out he says:...
thats perfect Jay-Gon - even enough for me because im retarded lol, anyways just a few questions-
1. does the battery pack just flop around?
2. The blade is held in by one screw- is it a...
so when you take the blade out does the LED just fall out then? and ya i saw you mentioned glue. . .also does the blade hold in there very good- that screw holding in a blade that is being swung...
i read all 23 pages and at the end was a very awesome tutorial- my question is : does the led just lay on top of the switch? or do you glue it in or anything? Also when building this is the battery...