Search:

Type: Posts; User: Obese Wan Kenobese

Search: Search took 0.00 seconds; generated 37 minute(s) ago.

  1. Replies
    5
    Views
    1,327

    It seems they can fit, but it takes a good deal...

    It seems they can fit, but it takes a good deal of force more than any other pieces.

    4" Deep fluted double female threaded connector and MPS Pommel style 11.
    https://i.imgur.com/Dfl5HXz.jpg...
  2. Replies
    5
    Views
    1,327

    I ordered them powdercoated from TCSS. There's...

    I ordered them powdercoated from TCSS. There's the smallest bit of color on the female threads of one part. Everything else fits that fine though. The pommel doesn't fit the hilt, but the pommel fits...
  3. Replies
    5
    Views
    1,327

    MHS threads not fitting

    I have some powder coated parts that are not working together. Some are tighter than others, but the pommel is simply not compatible with the bottom of the hilt. I've used different parts to make...
  4. Success! I've used bullet connectors to connect...

    Success! I've used bullet connectors to connect all the wires accordingly. I've reset the config and override files to run Neopixel. I can use the thin neck emitter with the PCB inside the blade side...
  5. Replies
    5
    Views
    1,526

    What came of this? Did you get it fixed? I'm...

    What came of this? Did you get it fixed?
    I'm having trouble making sense of the config settings. Mine won't light. I know the blade works, because it works with another saber. Where is your source...
  6. https://i.imgur.com/C4fUW6c.jpg?1 Bypass the...

    https://i.imgur.com/C4fUW6c.jpg?1

    Bypass the thin neck. The pins will be in the emitter with the blade. The bullet connectors will allow me to separate the PCB from the assembly when needed....
  7. Thank you so much! I just received my assembly...

    Thank you so much!

    I just received my assembly and the special ordered color coded PCB. I notice the + has one wire, while the negative wires are each coded to channel 1 and channel 2. Would I...
  8. Where do I track down the manual for the...

    Where do I track down the manual for the assembly? It just shipped, will it arrive with the purchase?
    I see the pin out list.
    "From top to bottom, board pinout
    ** Positive (+)
    ** Negative (-)...
  9. I'm considering looking for 2mm bullet...

    I'm considering looking for 2mm bullet connectors. They should handle 20amps. I could use them to split the NBv4+ and - into two each that can be disconnected as I need. This will allow me to put a...
  10. Replies
    2
    Views
    1,050

    I know it won't make more power than is supplied...

    I know it won't make more power than is supplied by the battery. But, if I'm understanding, more pins help supply the LED better. But, in the tutorial, it doesn't look like the last two pins were...
  11. Replies
    2
    Views
    1,050

    Neopixel 11 pin PCB wires

    It looks like the hilt side of the PCB in the video tutorial has two + and two - wires. With the data line, that's 5 wires, but there are 7 pins. More pins and wires can carry more amps through to...
  12. Support has asked around and found that JST...

    Support has asked around and found that JST connectors are not recommended to pull more than 4 or 5 amps. Connecting the JSTs from the harness with a Neopixel set up may not be recommended. I'm...
  13. Nano Biscotte V4 Assembly with JST connectors?

    Is there a diagram of instruction that will come with the Nano Biscotte V4 Assembly to tell us where to solder the data line?
    www.thecustomsabershop.com/MHSv1-Nano-Biscotte-V4-Assembly-P1445.aspx
    ...
  14. Royal blue x2, Deep red: Resistor

    So, I wanted to make a nice purple with two royal blues and a deep red on a tri cree from TCSS. The saber has a buckpuck with 7.4v. What resistor would be recommended to put on the red to make this...
  15. Replies
    13
    Views
    2,660

    QUOTE=SA22C;276814]The Teensy/Proffie saber board...

    QUOTE=SA22C;276814]The Teensy/Proffie saber board has localized clash functionality.

    Here's an example from the style builder:
    ...
  16. Replies
    13
    Views
    2,660

    Thanks, everyone, for the guidance. I may have to...

    Thanks, everyone, for the guidance. I may have to come back more, as it seems I really will have to try making this myself. I was really hoping others had this idea and made their boards with it in...
  17. Replies
    13
    Views
    2,660

    Thank you. In general, I would be aiming the...

    Thank you. In general, I would be aiming the blade to strike toward the middle. I expect that setting the flash to be brief, bright and in the middle third to be close to what I'm looking for. I'm...
  18. Replies
    13
    Views
    2,660

    Neopixel Flash on clash control

    As pixel blades make each LED addressable, is there a way to make the flash only do so in the middle of the blade, where most clashes occur? I've always felt it's a weakness to the look that the...
Results 1 to 18 of 18