Hey, for the first time I'm including a PLI on a Nano Biscotti v4 build. Any suggestion regarding where I connect the positive and negative in the wiring? I'll have a kill key in the recharge port -...
Type: Posts; User: CDSabers
Hey, for the first time I'm including a PLI on a Nano Biscotti v4 build. Any suggestion regarding where I connect the positive and negative in the wiring? I'll have a kill key in the recharge port -...
No, it's keeping the light and sound on without shutting down. He's using it for a film and after a while being turned on (and recharged) it shuts off.
He's asking if there is anyway to turn off the timer for how long the blade stays on. I've never tested it long enough to see it shut off. Is he mistaken?
Someone who purchased a saber we made is asking if there's a way to program the NB4 to stay on longer? They're using it in a production and it's shutting off too quickly. I've looked over the manual...
So I've wired a few NBv4's and now I'm wanting to play around with the programming a bit. I know in each bank how to control the color in the drive and fdrive, but what are the other options? Is...
Yeah I bought the board and the header separately - I didn't think of how to permanently attach it. I wasn't sure if you solder the back or epoxy it to the board. I had to modify the wiring since I'm...
I've hard-wired a few NBv4's with the extender, and this time I thought I'd try the MWS header on the Shop. One main question which I'm sure is an easy fix - how does one secure this header onto the...
After a few more trials - I found the problem was with a nearly visible piece of solder on the only pad I didn't photograph (the one on the center of the board. Thanks for everyone's help!
And so one of those joints would be causing the lack of swing and clash? I've done a few of these boards and this is the first time this has happened.
I re-soldered L3. Here's a super CU of the connections:
17253
17254
I changed it to:
gate=15
No difference. Still no swing or clash.
## Override File
vol=4
beep=40
rebootd=1250
motg=500
muteoff=0
gate=70
hclash=700
hswing=220
offd=200
Here you go, Dr. Let me know when to turn my head and cough. :D
17252
Yeah, sorry - here it is:
17243
17242
Yes - it's the same as I've used before (with a different color in each bank):
//Nano Biscotte 4.0
drive=1023,0,0
fdrive=1023,1023,1023
focmix=001
resume=0
shmrd=210
shmrp=6
shmrr=13
I've wired up a few NBv4's and never run into this problem. Everything's working great except there's no flash-on-clash. Any common reason for this?
I must have searched for an hour for this! Thanks!
OK - I know I've order a cheap (like under $10) heat sink module somewhere. The kind that specifically holds a Tri-star LED aluminum with the copper back with holes on the side and IN THE MIDDLE....
The wiring was spot-on. It worked fine until I trimmed the lines to the LED.
I purchased them here on the CSS. Should I contact them or how to I contact one of those you've listed? I'm here in the US.
....maybe??
So I've had the Pico Crumble setup and working for a few weeks - it's amazing. Then as I began to trim some of the wires for the LED and powered it up again, the sound went from powerful to...
So did you do that with the Pico and Rebel Tri-Cree? How did you arrive at that calculation? Is mine incorrect?
I'm trying to work through my first wiring of the Pico Crumble V2 to the Tri-Rebel RGB LED both sold here on the Custom Saber Shop. I wired everything exactly like the Pico's owners manual - which...