Thanks for the info. I finished it up and I also used a 3/4 inch PVC coupler. I didn't glue the speaker in though. I cut the coupler in two halves about 3/4 inches for both. Then I painted the half...
Type: Posts; User: Knight Of The Republic
Thanks for the info. I finished it up and I also used a 3/4 inch PVC coupler. I didn't glue the speaker in though. I cut the coupler in two halves about 3/4 inches for both. Then I painted the half...
Well I searched but couldn't find the tutorial that you guys mentioned. I ended up making my own. I bought 3/4 inch pvc pipe coupler and cut it into pieces. About 3/4 inch halves. I put the...
Thanks guys. I bought some NiMh batteries and they are charging now. On a side note, I freaked out when I turned my saber on and the LED sizzled out and the sound kept running. I was like huh? ...
I read it on this site. For every post I saw it was ok to use 6 volts I saw another one that said only use 4.5 cause you'll burn out your board. I'm a noob so I don't know. I think I'll just use...
I have a 4 AAA pack in my Graflex. I recently hooked up a MR Anakin sound board and I have read that they should only get 4.5 volts instead of the full 6 volts. If I take a battery out of my pack...
Well I received my Pololu board today and I already installed it into my Graflex saber. I LOVED it. It is so small and simple and it works perfectly. I used a extremely small tactile switch (which...
Ha ha. It is a Master Replica E-11 Stormtrooper Blaster (503\3500). My neighbor gave it to me at a GREAT price cause he was moving. I love it. Made of metal and pretty solid feeling.
...
Thanks guys.
Here is an updated picture of my Obi-Wan'ish saber. I changed the blade to green and did a bit more painting. I duel a lot with this saber and my hands turned black from the...
I would love a replacement.
It lets you use a 'momentary' switch instead of a 'latching' switch. A momentary switch will only turn the electronics on when you hold the button down. As soon as you release the button the...
Couple more questions.
I am now thinking I want to use a Soul P4 Blue LED with my Anikan MR ROTS board. Will that work? If so, do I still need to use a resistor? Same with the Cyan Lux 3, is...
I like it. Very sleek looking.
Well, it looks like I ordered the wrong Pololu board the first time so I had to buy another one. I didn't even know that there were different models, ha ha. The first time I ordered the SV board...
Great!! This is perfect. Thank you sooo much.
:D
Hey guys. I am looking for any help that can help me wire up my Pololu board & my 'SPST Momentary tactile switch' and my Anakin Skywalker ROTS MR sound board. I have seen the diagrams for just the...
Thanks. I'll ask for the diagram over there.
Thank you very much. I ordered a Pololu board just now. I haven't come across a diagram on how to wire up the Pololu board to the MR board on the forums yet. I just searched and didn't see...
Hello guys. I have a question. I have a MR Anakin Skywalker Force FX ROTS Sound Board. It has the- wire harness, clash sensor, original switch (still attached), and even the battery terminal...
1- I have several blades that I got from Ultra-Sabers and they are both 1 inch diameter blades. They fit like a glove in the MHS saber I built. Just the Graflex adapter was tight. It may be that...
Hello guys. When I duel with my MHS saber, my hands (and my little boys hands) get black from the Aluminum that rubs off on my hands. Is this residue dangerous at all? Is there anyway of...
1- The blade was not from your store. But it fit into my MHS saber perfectly. I tried several blades. The adapter was just way to tight. I tried to just sand it but it needed the dremel to get it to...
Well this morning I went out and took it all apart and added tape in the areas that needed to be shimmed up to keep it from wiggling and now it is much better. There is a super slight bit of wiggle,...
Ah, so it wasn't just mine. Thanks. Yeah, I am pretty good at making things work, but I was just wondering if maybe I got a bad one.
Any tips on removing some of the wiggle between the adapter...
Hello guys. I am posting pics of my two new saber builds. The first one is a replica Graflex that I got from the store here. I used a green LED and it does not have any sound. I think it came out...
Hello guys. This is my first post. This is a great forum and I have learned a lot. I just have some questions:
I recently purchased a graflex blade adapter for my replica graflex saber that I...