Search:

Type: Posts; User: morpheus1977

Page 1 of 13 1 2 3 4

Search: Search took 0.00 seconds.

  1. Thanks... That's what I figured.. I am just...

    Thanks... That's what I figured.. I am just waiting for the rest of my stuff to be delivered tomorrow... I already 3d printed parts I needed..
  2. Quick question about powering a 3.7v led

    I am working on a project and the LED's I want to use have a forward voltage of 3.7 v typ - 4.5 max. 20mA typ The blaster core sound effect card outputs 3.3 v 18mA on the ray progression outputs.....
  3. If anybody has any experience with the Blaster Core sound boards. I have a ? or 2

    Can 4 led's (4 barrels) be driven off of the one main barrel connection on the board?
  4. off topic question concerning batteries

    Does anybody know where I can get my hands on a 12v li-ion rechargeable battery pack??
  5. That's what I am going for.. I am using a Blaster...

    That's what I am going for.. I am using a Blaster Core V5.0 The way the Auto/Single fire works is either off or on.. (It does work with a simple latching switch). So It doesn't use two separate...
  6. The problem is with most rotary switches. You...

    The problem is with most rotary switches. You rotate the switch the same direction to turn it off or on. I am looking for something that's bi directional. I want to switch between single fire and...
  7. Need some help looking for a type of switch.

    I am trying to locate a latching rotating switch. A simple, turn one way it's on and turn back it's off. Anybody heard of something like that? Or where I can find it?
  8. question about directly lighting LED's from a battery pack. (train of thought).

    I just wanted to make sure I have my train of thought on the tracks and going in the right direction..

    I am starting a new project soon, and I am going to be using a Blaster Core sound board. I...
  9. Replies
    1
    Views
    1,237

    Blaster Core 5.0 Help needed.

    Default Question for anybody who has used the Blaster Core 5.0



    If this is not the right place to post this, Mods please move. I just figured since the store sells it here. It would be ok to...
  10. Question for anybody who has used the Blaster Core 5.0

    Mods please delete this post. I have moved it...
  11. If i wanted them both to turn on using a...

    If i wanted them both to turn on using a momentary switch. Could I still use a spst
  12. Thanks for the advice everybidy. I have almost...

    Thanks for the advice everybidy. I have almost everythibg i need
    The store i went to only had one 8 AA battery holder. So i grabbed that and 2 of...
  13. couple of questions about wiring up a computer fan for a prop.

    I have two of these computer fans.
    http://i17.photobucket.com/albums/b81/morpheus1977/Mobile%20Uploads/20161001_151049_zpse2tiyikg.jpg

    and these are its specs...
  14. They are wired parallel I believe. I had all of...

    They are wired parallel I believe. I had all of the pos leads soldered together then going to the battery pos after the switch. The neg leads soldered together, then that line going to the battery...
  15. I am re-reading the manual now.. I have one more...

    I am re-reading the manual now.. I have one more bank of LED's I can use....
    the whole thing with the LED pos and neg. I always have to double check I forget which is pos and neg LOL
  16. sorry I know my bad. (normally I am pretty good...

    sorry I know my bad. (normally I am pretty good when it comes to giving detailed info)

    this is the battery pack I was using.
    7.4v Li-ion 800mAh 14500 Battery Pack

    the led I was trying to run....
  17. well I don't know what I did wrong. I wired the...

    well I don't know what I did wrong. I wired the pos of the led bank after my switch and the neg to the battery lead. But when I flipped the switch all of the LED's in the bank burned out. (I even had...
  18. yup planning on having audio, trigger, clip...

    yup planning on having audio, trigger, clip sounds the works. Those I have not problem hooking up because they have dedicated solder pads. I was just a little iffy on the bank of LEDs. Those will be...
  19. just want to confirm my wiring so I dont fry my board 4 days before comic con.

    *note * this will not have a kill switch or a recharge circuit

    I am working with a blaster core from plecter labs and I just wanted to confirm my wiring (mainly my battery and switch)
    ...
  20. Replies
    3
    Views
    698

    I don't have the connector in front of me but...

    I don't have the connector in front of me but from what I remember there were only two solder pads on the connector it's self... It just threw me off because I know USB also transfer data which...
  21. Replies
    3
    Views
    698

    quick question about micro USB...

    I have had lots of help in the past when it comes to wiring. So I thought I come here one more time...
    I am doing a mod on a prop for SDCC next week that will use my cell phone. (its the pipboy that...
  22. Another question for our LED Gurus....

    So I am working on my Gears of War armor/costume for San Diego Comic-Con. I wanted to add some accent LED's to my helmet and my armor. Now I know how to wire up LED's and all of that. (thanks to...
  23. Replies
    8
    Views
    1,531

    Well my next project is to make some foam GOW...

    Well my next project is to make some foam GOW armor for SDCC.
  24. Replies
    8
    Views
    1,531

    I don't know I was thinking about just taking it...

    I don't know I was thinking about just taking it all off.
  25. Replies
    8
    Views
    1,531

    Thanks I know how u feel about the blood I was...

    Thanks I know how u feel about the blood I was thinking about trying to take it off.
Results 1 to 25 of 309
Page 1 of 13 1 2 3 4