Search:

I was probably just reading the package wrong. Because I did find that exact item you linked. Just didnt say 1A anywhere on it. Says 0.5 A @ 125V AC.... I believe that is referring to the "switching...

Hey Rhyen I went to 2 radioshacks and the reed relays they had with that part number were actually 5V 0.5 Amp.... is this a mispackage on their part? Wrong internet listing? Would this work? Can't...

Thorn, I referred to that same diagram in my post. But my questions werent about that. They were how to determine the proper specs on a relay and whether or not a relay/buckpuck would interfere with...

Why does the buckpuck care about the switch? Seems like it shouldnt since its coming off the board and the board keeps the circuit on.... so buckpucks just cant come off the boards at all? Different...

excellent! so green and white are kill switch and can be negated.... purple and orange will go into vin/vout on the buckpuck.... Now, would there be any consequence for not using a relay in this...

Ok so I am taking apart my obiwan force action (see picture). Yellow wires on left (out of picture) go to the speaker. Top 2 are battery I'm pretty sure. Bottom 2 blue are for the switch. Now there...

Well I am more concerned about the saber being on than the switch itself so I guess I phrased that poorly. But with the hasbro soundboard I won't have to hold the button to keep the saber on correct?

found the guide by Jay.... Filed down the holder and lens both a little. It fits well enough but it rattles a little bit between the extension and the holder so I may end up using a little bit of hot...

Ok I'm sure I'm just being paranoid... but again as most of you know I just got my parts for my first saber. I got the SPST Momentary Red standard switch because I am going to wire into an economy...

I picked up a 4pc precision pliers kit for 2.99 at my local hardware store... was a sale price... but still should be no more than 5$ for the right tool.

It is the 5 degree.... So the seemingly missing clip on 1 side of the holder is normal?

In further review of my first shipment from TCSS... it appears that my lens holder is broken. Now the holder has to arms at the top that I assume are suppose to have clips on the ends of them to hold...

I just don't see how this physically works. I'll need to get some needle nose pliers I guess to try it out though. I can't get it in with the pliers I have. Or the c-clip pliers... can those be...

So I got the parts for my first build in.... how exactly does the MPS clip fit with the pommel insert and into the pommel?

The picture of this item shows 3 wires coming off of it. However the battery pack normally has 2, and a speaker normally has 2. So I would think there should be 4 wires. Am I missing something? Could...

What exactly does the relay do? I mean thats a 1000mA relay with a 1000mA buckpuck (I also don't see why you have the buckpuck and the driver board... thought they did the same thing).... which I...

I was probably going to use the gold cap just as an extra for decoration purposes. Is is very possible I would be using a hasbro sound board but I am worried about how bright the LED will be if...

Hilt style 4 with standard style switch hole

Screw on LED blade holder style 17

MHS ribbed extension

MPS Pommel style 3 v2

5/8" Gold cap

I looked into those CREE leds and they look a little difficult to mount, so I want to stick to stuff from the TCSS shop. I'm probably going blue Seoul P4. So the 350mA this card puts out wouldnt...

Is the difference really that noticeable? Which do you guys prefer?

What kind of clip are you referring to? I was planning on hot glueing mine in. You don't mean like the covertec clip do you? I thought that was for like a belt clip on system.

So when I click on Main Body style 4 here

http://www.thecustomsabershop.com/Hilt-style-4-with-standard-style-switch-hole-P103.aspx

it says stock available.

However when I add it to the cart...

I just happen to be trying to make this same call. I am going to get Main Body style 4 and have the ridges and top piece powercoated black. Bouncing back and forth between the blacks. I am going for...

Ahhh I see. Thank you very much for the explanation guys. Was just trying to figure out why that number was chosen :D.

6v source... 3.25V for the P4 with 1A draw gives me 3.3Ohm. I still dont see it :(