Search:

Type: Posts; User: Forgetful Jedi Knight

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 21 minute(s) ago.

  1. Replies
    23
    Views
    3,721

    You could get away with running two Tri-Crees off...

    You could get away with running two Tri-Crees off of one sound card as long as you use the right battery solution 10-15A draw.

    Neopixel will require 2 boards and 2 batteries.
  2. Yun would NOT be able to use a 18650 battery...

    Yun would NOT be able to use a 18650 battery holder with that.
  3. 18650ís are preferred (and recommended) because...

    18650ís are preferred (and recommended) because they easily fit within most hilt designs. The downside is, as I said, runtime. If you can work a removable battery solution into your design, that...
  4. OK. Now that I can see this, here are my...

    OK. Now that I can see this, here are my thoughts...

    I do think you are overthinking things a bit. And yes, I believe the batteries will be an issue, simply because charging them could be...
  5. First, welcome to the forums. Second, you may...

    First, welcome to the forums.

    Second, you may want to use a image hosting service such as “imgbb” (imgbb.com) to host your picture(s) and then use the bbcode (medium linked) to copy/paste into...
  6. Replies
    6
    Views
    386

    Itís not ideal. A 6-32 would be pushing it, but...

    Itís not ideal. A 6-32 would be pushing it, but it may work.
  7. But they arenít, so the answer is no.

    But they arenít, so the answer is no.
  8. Replies
    11
    Views
    1,006

    Nice work.

    Nice work.
  9. Replies
    10
    Views
    795

    You donít have nearly enough depth in that blade...

    You donít have nearly enough depth in that blade holder.
  10. Replies
    7
    Views
    755

    No, you wouldnít as far as I know.

    No, you wouldnít as far as I know.
  11. Replies
    7
    Views
    755

    https://www.thecustomsabershop.com/Power-Xtender-2...

    https://www.thecustomsabershop.com/Power-Xtender-20-P652.aspx
  12. Replies
    7
    Views
    755

    Short answer, yes, you’ll need the PEX.

    Short answer, yes, you’ll need the PEX.
  13. Replies
    10
    Views
    795

    Well, you do have to tighten both screws while...

    Well, you do have to tighten both screws while the blade is in. With that said, that is way too shallow for a proper blade depth. Also, a picture of the entire saber would be a bit helpful.
  14. If you have a pommel that has a little depth to...

    If you have a pommel that has a little depth to it, thatís all you should need. Itís all Iíve ever needed.
  15. Replies
    6
    Views
    610

    This might work, if you use speaker holder v4. It...

    This might work, if you use speaker holder v4. It is a way better option than the other suggestion that Iíve seen mentioned (which I would never, EVER recommend).
  16. Replies
    6
    Views
    610

    The locking speaker holder won’t fir. The...

    The locking speaker holder won’t fir. The internal diameter of the chokes are .8” you can get a speaker mount without the threads (I believe it’s speaker holder 4) however, you have to come up with a...
  17. Replies
    6
    Views
    471

    Well, either he is wearing the battery down, or...

    Well, either he is wearing the battery down, or his setup is drawing too much power from the battery. Since “after a while” hasn’t been defined with minutes, it has to be that OR he has a bad/poor...
  18. Replies
    6
    Views
    471

    Again, are we talking about after he turns it off...

    Again, are we talking about after he turns it off using the power button? If that is the case, it IS covered in the manual.

    Otherwise, the saber works just like a normal flashlight, it stays on...
  19. Replies
    6
    Views
    471

    Stay on longer how? After they turn it off? Or...

    Stay on longer how? After they turn it off? Or are they complaining about the runtime?
  20. Replies
    2
    Views
    389

    Iíve never heard of that happen before. In some...

    Iíve never heard of that happen before. In some LEDs the polarity matters, and others it may not, it all depends on the manufacturer.
  21. Replies
    5
    Views
    737

    You should be able to use them on the (-) side,...

    You should be able to use them on the (-) side, BUT the polarity of the dynaohm resistor does matter.
  22. Replies
    5
    Views
    737

    1. Dynaohms arenít meant for main LEDs, just...

    1. Dynaohms arenít meant for main LEDs, just accent LEDs. ;)

    2. Donít adjust the drive settings, just use regular resistors on your main LEDs (math involved).
  23. Itís one resistor per LED. Youíll have to...

    Itís one resistor per LED. Youíll have to obviously replace the resistor.
  24. I’ll send you a PM. Locked - FJK

    I’ll send you a PM.


    Locked - FJK
  25. Replies
    4
    Views
    621

    The do make adapters between the 2 versions. That...

    The do make adapters between the 2 versions. That may work better, if theyíre in stock.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4