Search:

Thanks for that correction. Easy enough to rectify! Got everything soldered together for a successful trial run.

Here's my final corrected/updated wiring diagram, in case anyone is planning a...

This is my second saber, but first time using the Nano Biscotte v2. If someone could confirm that I've got this set up correctly, it would be much appreciated. I'm particularly curious if I'm using...

No problem. All good general information to have for the future. Thanks for the clarification.

Hmm... Interesting theory, Jay-gon. I can see where that could cause problems. Would I be correct in assuming that this would be a non-issue for the plastic RICE port style #2? (In other words, one...

Speaking of wiring up the RICE port, I read in some thread earlier (wish I could find it now... could also have been on the PlectarLabs site) that if you're using both a recharge port and a RICE...

I had no idea they were interchangeable. I thought resistors could only be used on the positive wire. Is your preference one of convenience, or does it somehow change the intensity of the light to...

So, to be clear, if I want to install it on the board I would need a 47 ohm 1/8w SMD resistor?

And, unless I'm missing something, none of this information can be found in the manual. I've been...

Sounds good... A quick search on radioshack reveals a number of 47ohm resistors, which vary by wattage rating. Am i trying to match that as close as possible to the LED? (for example, would a 47ohm...

Rather than starting a new thread (since this one is pretty recent), I thought I'd tack on my question here...

I've been reading through the PC 2.0 manual, trying to calculate the resistor value...

Thanks, Jay-Gon. I make guitars as a hobby, so I'm quite comfortable with soldering lots of components in confined spaces, but understanding battery values is new territory for me. I appreciate the...

Elim, that sounds very similar to what I was planning to do, except I was hoping to use the 14500 side-by-side pack. My concern is that both of these packs only put out 800 mA, while the PC manual...

Wow, that is really quite impressive. I must admit, I didn't expect to see anything quite so respectable looking when I saw "PVC build"... Big props.

That katana-wrapped one is downright sick. Also really like the look of the more rustic one in the bottom of the case. Most impressive.

Thanks a bunch. Version two made the most sense to me, but I wanted to be sure before I wired everything up.

And yes, they will be perpendicular to each other. I'm planing on using an "X" shape...

I realize this thread hasn't generated any new posts for a while, but I had a question concerning the dual-swing sensor setup. Unless I'm seeing something wrong, the picture and video in this thread...