Search:

Type: Posts; User: jbkuma

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    69

    Sometimes there will be a coating on the pads....

    Sometimes there will be a coating on the pads. Some mild abrasion and flux should help.
  2. The flammability isn't an issue.

    The flammability isn't an issue.
  3. Replies
    1
    Views
    282

    I printed a design in both pla and petg. They are...

    I printed a design in both pla and petg. They are both quite adequate.
  4. Replies
    6
    Views
    750

    I have the 433mhz chips, I just haven't had time...

    I have the 433mhz chips, I just haven't had time to mock it up since I'm in the process of moving.

    I'll probably make a mock up and tutorial in a couple weeks, as soon as I"m moved and the new...
  5. Replies
    6
    Views
    750

    If you search for "433Mhz RF Module Receiver and...

    If you search for "433Mhz RF Module Receiver and Transmitter Learning" you will find some simple RF chips that will work without needing any logic. You would wire these as switches or parallel to...
  6. Thread: Newbie question

    by jbkuma
    Replies
    4
    Views
    518

    There is also a calculator here, look up.

    There is also a calculator here, look up.
  7. Replies
    9
    Views
    1,417

    Thanks! It's been disassembled for months,...

    Thanks! It's been disassembled for months, pending a refit. I just haven't gotten around to making the new electronics for it!
  8. Replies
    9
    Views
    1,417

    It looks to me like you are driving full,off,off...

    It looks to me like you are driving full,off,off and full,full,off
  9. Replies
    6
    Views
    739

    I was talking about the blade.

    I was talking about the blade.
  10. Replies
    6
    Views
    739

    I'm not sure how this module is setup, but...

    I'm not sure how this module is setup, but usually + really goes directly to the battery, the + pad is usually to feed power to the board. The manual shows both wires going, but the power isn't...
  11. Replies
    2
    Views
    665

    Make sure you aren't including meta data

    Make sure you aren't including meta data
  12. Replies
    7
    Views
    2,107

    Welcome back! Plenty of us have projects that...

    Welcome back! Plenty of us have projects that have been on going for years without so many achievements. I look forward to seeing this develop.
  13. Replies
    10
    Views
    1,308

    You can mount the LED directly to the blade...

    You can mount the LED directly to the blade holder and count on that as the heat sink.
  14. Replies
    10
    Views
    1,308

    If there is any excess material on the heatsink...

    If there is any excess material on the heatsink trim it down. You can try drilling through the blade holder and into the blade. Since you don't have a lot of room, I'd use small screws as you can. ...
  15. Clever!

    Clever!
  16. Replies
    8
    Views
    1,449

    Probably too long and too close! I haven't had...

    Probably too long and too close! I haven't had much time to work on the concept much, it works well, but there are things I would like to do better, and make things even more versatile.

    Here's my...
  17. Replies
    6
    Views
    968

    The main thing is you don't want your speaker...

    The main thing is you don't want your speaker bouncing around, and ideally it would be held snugly and as far from the pommel cap as much as you can manage in this setup. The speaker will generally...
  18. My kind of saber! This is really unique and...

    My kind of saber! This is really unique and interesting!
  19. Thread: Auto shut-off

    by jbkuma
    Replies
    6
    Views
    717

    What time of blade is it? (high power LED?...

    What time of blade is it? (high power LED? pixel?)
    How long is the blade able to stay illuminated?
    What kind of battery is in it?
    What color blade? (solid R, G or B would be most efficient, mixed...
  20. Replies
    8
    Views
    1,449

    That is good to know, I will keep it in mind.

    That is good to know, I will keep it in mind.
  21. Replies
    4
    Views
    982

    The pommel itself is agnostic, the overall design...

    The pommel itself is agnostic, the overall design will determine how the saber presents itself.
  22. Replies
    2
    Views
    616

    All LEDs only illuminate in one direction but...

    All LEDs only illuminate in one direction but some switches might have circuitry to work in either direction I wouldn't expect that in a 12mm switch, since there is barely enough room for the LED and...
  23. Replies
    13
    Views
    2,153

    You don't need to go any further than your...

    You don't need to go any further than your kitchen for examples of the oil. Any pan with baked on black or brown oil is what you'll get. olive oil has a high content of things that will smoke and...
  24. Replies
    5
    Views
    911

    The resistor should be able to handle that...

    The resistor should be able to handle that current load. It sounds like something else is going on, it could be that your + and - are bridged on your LED and your LED is seeing full current from the...
  25. Replies
    8
    Views
    1,449

    The 7/8" tube does not fit inside the 1" tube,...

    The 7/8" tube does not fit inside the 1" tube, and the 3/4" tube doesn't fit inside the 7/8" tube. Even if it almost fit, any bend or dent would cause it to get stuck even if you couldn't quite see...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4