Search:

I'm assuming you were referring to ST's GHv3 and not me.
I have both GH & CFX boards in my sabers. So, I saw similar settings.
I have no others boards in my sabers, so I can't vouch on those.
I do...

Thank you.
Wasn't in any ST manual, but found values and how to modify them in the PL manual.
Cofig & settings are about the same for both boards.
Did a test and it worked.

Hey all,
Built two sabers with GH v3 board and Tri-Cree in hilts. Copper Nova Tri-Cree RGB LED (all from TCSS).
I had no problem with blade colors with my programmed sound fonts. All look great...

I contacted UltraSabers where I got the blade and they said They use a 14" piece of the Corbon and it comes out to 5 wraps in the clear thin walled blade and 6 wraps in a thick walled. I'm going to...

Thank you! So, I'm guessing that a Quad wrap is just Corbin rolled four times then?

I'm a little confused about a blade that is "Quad wrapped" in a clear blade. Is it just the Corbin film rolled four times? That will only be around 11" or so. I've read about clear Cello basket wrap...

Never thought about using my meter on continuity mode to give some voltage. Thanks for the tip! Saved me from rigging up a dual alkaline 2-cell, soldering, etc.
My Fluke multi-meter prongs on...

Rounded up on the TCSS calculator and ordered the proper ones. Thanks for the help & input!

Ok, waiting on my saber parts for an in hilt build and one of the items is a Tri-Cree RGB LED disc.
How do I know what LED is what color for proper wiring to my sound board? Especially making sure I...

Thank you FJK! I'll calculate the 3.7v value.

Never mind.
I received the cheapest/crappiest hilt from them. Aeon LE v2. Total junk! Not worth putting any $$ into a 1" ID fancy looking flashlight.
I decided to replace the blue LED that came...

Hey all,
Going to start a Tri-Cree RGB hilt using one of my many 3.7v 18650's as the power source. I know how to calculate resistor values needed, but not sure if I should calculate input voltage...

Hey all, Did the "mystery box" and just got a stunt one. ID of tube is 1" and want to mod it anyway with in-hilt Tri-Cree and a Golden Harvest.
I searched 1" hilt builds here and didn't find...

Hey all,

Purchased two CFX v10 cards from TCSS for two different builds and all went smoothly. I really like the HOTH sound font they came with and they are on both builds.
Love the Wampa...

Hey all,
I finished my Disney Parks Exclusive Rey/Luke/Anakin saber today and it turned out great. Same internals as the Vader one, so it was just duplicating. A few differences, but nothing...

18052

It might or might not work. I can't help you there. Read pages 123 & 124 of the manual. That's how I did mine and it goes into deep sleep no problem.
Let us know how it works. If it doesn't, you'd...

Got it and visited the CFX site. Learned to copy/paste/change many things. Worked out fantastic! Learning day by day. Changed several of my fonts. Thank you TCSS moderator! Just needed a point in the...

I believe I can answer your original question on splitting wires.
Neg wire that has to go to two solder places via CFX v10 manual/diagram. You want to split a single 22 wire into two very thin...

Hey all,
Purchased and installed the Unhinged Kylo Ren sound font from Ron/Madcow at Saber Fonts. Loaded fine and getting excellent sounds. Purchased a bunch from him and all are awesome.
...

Are you planning on using only one strip of Neopixel or putting two strips back-to-back?

Almost forgot.....I removed the colored BIC pen caps on the Vader switches and replaced them with cut down automotive rubber vacuum caps. The black vacuum caps blends in with the grip strips and...

Ok then. Received the Disney Parks Exclusive Rey saber and removed the internals on everything. Same parts as the Vader one, so I'm savy on duplicating this build. Just a few differences in the hilt...

Alrighty then, since the Vader turned out good and I now know what makes that conversion successful, I found a Disney Parks Exclusive Rey's (Anakin/Luke/Rey) new in box online and bought it. Just...

https://www.facebook.com/100052091049266/videos/1029745767602875/

Ok, lets see if this video downloads. Just a short video showing Vader's red, Luke's green ROTJ and Luke's blue from ANH & TESB....