Without damagin it, I mean? Heres a pic of what I'm talking about https://imgur.com/a/YLmln
Type: Posts; User: phook15
Without damagin it, I mean? Heres a pic of what I'm talking about https://imgur.com/a/YLmln
I'm using it as a power indicator.
Then what type would be best?
Heres another bump
Bumping this for visibility.
Heres an imgur link if the upload is spotty. http://imgur.com/a/w8kgI
15783
I feel confident about it now but I just need to make sure that the resistor is correct and that the wiring for...
For the silver oval shaped tab that holds the small silver button, I'm having trouble fitting it into the hilt. The button fits into the tab very tightly, and this tab dosen't reallly go into the...
http://imgur.com/a/gdUQq
Not sure if this is right, especially with the recharge port. I think the green wiring needs to go to the LED? Also I'm not sure which of the buttons are auxillary or...
Wouuld it be possible to replace the Graflex 2.0 upper shroud with a vintage/replica shroud? The 2.0 has an innacurate s curve on the emitter. What modificaions would need to be done?
No, your best bet is to glue it to a speaker/battery holder like on of these http://www.thecustomsabershop.com/MHS-speaker-and-2x-AA-battery-holder-P766.aspx
My Radioshack bought $30 soldering iron worked for Hasbro soundboards but do I absolutely have to use an esd safe soldering iron for a plecter labs board?
Crystal focus 8
It seems like a simple set up, I might be wrong but It seems that the board just serves to make the install easier? Plecter Labs dosen't have them in stock for another 2 weeks so I'm considering it.
So there's no wiggle if I use the 2.0 kit with the 1 inch blade holder?
Say I want to do some medium to hard dueling, would the body hold up? I know people think it's uncountable to duel with but I havea saber with similar grips and a control box and I have no problem...
14994
So Im using 2 sleeves for my saber, the grip section is sink tube and the emitter section is a thicker MHS shroud. I'm not exactly sure how to secure the shroud to the saber properly, I plan...
When I'm dueling casually with friends, we don't use armour, but there's an agreement not to go for the head and to not jab at the upperbody so no one gets stabbed in the neck.
My sink tube saber I made looks rough, the finish is dull and just not very good,what spray paints and primer are recommended to redo the finish?
This deserves more praise for the work put into it and the originality of the design. Nice work
Same, I think the store is working on new parts for the V2 series, according to this video, although it was released in 2014 so who knows.
https://www.youtube.com/watch?v=H4TFsqiwOJk
http://m.imgur.com/CaC2eHG
Due to the design, I can't use trim rings because the shrouds go over MHS parts but don't end when the mhs section does. 14890
I'm using a 1.5 inch sink tube over a MHS V1 hilt part, would I need 3 or 4 screws around the top section of the sink tube and 3 or 4 on the bottom? Or are there alternative methods besides screws?
I felt like my hilt looked a little bland, so I added a control box made from a stapler. I don't know if this has been done before but I think it turned out allright.148711487214873
I know it fits over 1.45 snug but does it expand a little?