Resonance chamber makes a difference. On my kids which are all NB with 28mm bass speaker, one has the sound card in a ribbed section up front and the others have the card on top of the battery in a...
Type: Posts; User: Darth Nater
Resonance chamber makes a difference. On my kids which are all NB with 28mm bass speaker, one has the sound card in a ribbed section up front and the others have the card on top of the battery in a...
Yeah, I've had to buzz out NB discs to get them to fit the way I wanted before, but haven't ever got real close to the edges. This may require another makeshift source again. Wondering if I threw...
I was in this same boat earlier this year. Did a search on here for the same topics and after reading the suggestions, I got the Aoyue 469. It didn't cost much, I don't use it much. It worked...
Wondering if anyone has modified NB 1.15 chassis discs to hold a CF or PC inside of a ribbed section? Contemplating pulling the PC2.0 out of my saber and using it on a build for a friend, then...
As far as a specific sound font, thats hard to say, but in my opinion across the board, Madcow's fonts are simply the best. Have sat on Saberfont a few times listening to fonts over and over, and...
Well, I say that. It was on for probably an hour and still showing red. I unplugged the jack and put it back in, then it showed green. I plugged the jack in and then plugged it into the wall...
I was wary about this 2 months ago when I read it. Bought one anyway for a saber I'm giving my cousin's kid for her birthday. Decided to test it. Plugged it in on the main hilt of her saber (which...
You want to make sure you have a nice flush cut on the end of the blade as well. I'll tape mine off with masking tape and then make the cut with a miter saw. Stuff some paper towel down in there...
The TIP42 transistor is what you need to make this one work. With that in place, you would see quite a difference there.
I built a pair of sabers for the kids once that are short and consist of a pommel/7" main body/emitter. Both using cheaper non TCSS soundcards (I'm not breaking the bank for something they are...
I just did a Tri-Cree heatsink holder swapout on a PC2.0 (7.4V as well) which was originally using a 4 die LedEngin. Before I was able to get away with the small resistor on the PEX for those 2 dies...
I've only done 2 PEX boards for FOC, but both used a small enough resistor that I was able to mount it on the PEX itself. Granted one is on a PC2.0 that uses 7.4 and was originally set for a 4 die...
Research sucks, but pays hardcore in the long run. Not just on noob things such as "what resistor?" or "can this power that", but mainly size/space/requirements. The other main factor that has no...
A year ago before premier hype, it wasn't that bad as far as finding what you need in one shot. Sometimes you might have had to make exceptions, but you could get by. Right now, business is likely...
These were my settings on a PC2.0 with the board in the grooved choke section. I copied them to another saber I just did with an NBv2 also in the choke. I just copied the whole thing so disregard...
Wait, holdup... still might work with the new style flat heatsink. That's going to save over a half inch in the neck.
Thanks, won't be doing that then. Saved me some time and $$$.
It will help heal any regret of not getting an extra thermal tape pad.
I've currently got a PC 2.0 at 7.4V running an LedEngin RGBA with R&B in series for main and G&A in series for FOC. Thinking of getting a Tri-Cree BBW as a quick swap for this, but wondering if I'm...
Keep in mind the length of your battery solution and where your switch hangs down. And advice up front, if you have a way of using a double 18500/18650 as opposed to a side by side 14500/14650... do...
That couldn't be better said. The first time you get one to the point of what you think is "finished" and you hit the button and it ignites.. "Wow... it works... and it is AWESOME!"
I have a...
The NB is an incredible value. It basically takes away much of any reason to use an econo board. You can make it simple and still have great sounds, and it will still drive more advanced options if...
You've already made your choice, but I'll add anyway.
For someone doing a single saber, buy it. If you planned on multiple in the future (which I ended up doing eventually), you'll need a tube of...
For what its worth, the one I did with a PC2.0 has the sound card up in the ribbed/grooved extension and its hot glued into a section of a kid's tee ball tee that was laying around and just happened...
For color mixing, just terrible with major separation. For a solid, the best word to describe is "splotchy". Maybe with red you might get an unstable Kylo Ren effect, but likely would not look good.