I was wondering if anyone knows if the V1 trim rings will slide over a V2 piece without much wiggle.
Type: Posts; User: WookieeGunner
I was wondering if anyone knows if the V1 trim rings will slide over a V2 piece without much wiggle.
I am guessing the answer is no but I figured I would ask anyway. Does anyone know if the threading that holds the two pieces together (so the one you undo to add the cubes) is the same threading as...
I realize that the MHSv1 boxes are curved to fit the OD of MHSv1 pieces. Is it possible to use them on MHSv2 with a small gap on the edges or is the differences between OD's too big?
The heart has NB4 but the wallet is currently saying stunt. :p
Easiest way is to create three profiles:
color0=940,0,0
color1=0,940,0
color2=0,0,940
and then cycle through them. That will only have one die at a time so you can see what color it is.
Just curious what is the difference between using the Tri-Rebel with two Cyans vs Tri-Cree Green and Blue vs Tri-Cree Green and Royal Blue
You have that right about the 14550 and dummy cell.
Are those gold colored O-rings on the emitter neck?
Typically to fry a circuit with ESD you need the circuit to have a different ground than you. So for example, if you walk across the carpet and then grab the saber off the table, a static discharge...
You have missed one small detail. The Luxeons are 1000ma (mili-Amp) which is a rating of current. Batteries are rated at mAh which is mili-Amp hours. So a 2600 mAh should theorectically last 2.6...
What color is it? Typically red is the only color that can be powered off of two AA batteries. That is why you see people use a 3 pack in stunt sabers.
That's true. That being said, some of the USB cables that come with chargers only do the two power wires for cost savings.
It could be. Were those two wires on the two outside pins? What pin they are connected to is much more important than the color. You can do a google search on "micro usb pinout" to get that info. ...
How close is the sound card to the speaker? The vibrations from the speaker can set it off, though usually that is the swing sound.
Ok, just to make sure I understand, when you have LED, Battery, and Speaker attached and you touch the two wires, the LED comes and and you get the idle hum. You then touch the two wires together...
I am using the Premium. That being said, I am also using Pommel 10 which has plenty of room for the speaker. As a matter of fact, my current layout requires me to have the speaker in the pommel to...
Also, make sure that you wire the polarity right on the recharge port.
I am pretty sure AA's are the same size as 1450's.
I'm currently trying to use the MHS Extension Blank Style 1 as the basis of my body. This goes into the MHS v1 to MHS v2 adapter that then goes on to an MHS v2 extender and blade holder. My initial...
Did you wire the Recharge port? I was thinking the recharge port should have two connectors, one that plugs into the NB and the other that plugs into the battery.
The other common problem you see with curved sabers is the activation button is put in such a way that you can't grip the saber behind the curve and still have access to it.
A common blade length for Katanas is from your hand to your ankle. The way I measure is to grab a yard stick and hold it so the low number edge is at ankle height I then read what measurement is at...
Actually both. Each company handles how the heat sink assembly and the blade holder align with each other differently so you need to use the heat sink assembly from the same company as the blade...
So I used the sale this week to finally buy electronics for my saber. I'm using the MHS Extension Blank Style 1 as my handle. It is the one made for the grooved parts and so has a 1.1 inch Inner...
My understanding is that any of the standard blade holders will work with it. What it means by "2 piece design. The threading connecting the 2 halves is not the normal MHS threading. " is that the...