Search:

Depending on how bad the dent is - it should be ok, as long as you don’t have the screw pushing up next to it.

I’d check ALL of your wiring first. If something was “yanked on”, something probably came loose/apart.

After that, I’d review all of your configuration files, to make sure they’re ok.

That is fine. It’s the battery’s PCB.

I would guess so. Most signals on the board are ~20mA.

10000 Ohms.

It would be instead of.

That’s fine. There is no need to be scared of Li-ion batteries. I’ve been using them for the nearly 15 years I’ve been in the hobby.

You’re going to need li-ions, ESPECIALLY if you do a Neopixel build. You’re not really going to get around that. The ones in the store are safe, as long as you’re not completely stupid in handling...

Well, here are my thoughts:

CF LS’s are incredibly hard to come by these days. You’d be better off with a CFX.

Neopixels are way more durable than old style string blades. FoC usually looks...

That’s more so you don’t accidentally blind yourself.

A tenth of a volt here or there won’t really matter. The resistors are usually rounded up anyway, which covers inaccuracies in voltages.

I normally use my bench supply.

You can use a 2AA battery holder an spout a paper towel over the LEDs, and touch the appropriate wires to the pads and you’ll know what color is which. I use to...

The “mystery” to those is actually whether they work or not. ;)

Use the 3.7V value.

You might have a dead speaker, a disconnected wire, or a bridge in your speaker wiring. Would need good high quality close up pics of the wiring.

Yu may need to have the combos active for those to work. I haven’t really looked at them.

Oh, ok.

You would need a chassis that would fit inside a 1” diameter. Fitting things into that will be a challenge. You won’t really be able to put a sound card on top of a battery pack.

The diagram looks ok, though I don’t know what the PCBs on the far right are for.

It’s possible, if you know what you’re doing. I don’t think a 28mm speaker would fit in that.

Also, since this forum IS attached to a store, I removed the link. 😉

You can go to crystalfocus.net , they have a lot of blade styles (and their configs) that you can view and mimic.

Check through the ports on the side menu. Also, make sure the saber is on.

There are disks for 1.15” sections though you’ll basically only be able to use those for the battery.

As that’s only been out for a few weeks, I’m going to guess that there aren’t that many build with it… yet. If you’re not going to try to duel with it, you should be just fine.

It should work, you just have to check the length.