Search:

Hi,

I was wondering if anyone had or had made an Eagle file for the pico crumble? I am making a small breakout board that should reduce the vast majority of the wiring for a simple saber. Speaker,...

Thanks for the response. Looks like I made a dumb and fatal error 16 hours before my deadline.

I was at the point of putting the final assembly together when I decided to charge it. It looks like...

Hi guys,

24 hours till I have to be done with this saber (it's a gift) would be incredibly appreciative of advice.

I'm extremely close to finishing, and the one problem I'm having is with...

Thank you! I'll try charging the battery, and will report back soon.

Hi guys,

I have a Pico Crumble and a 1.5w speaker, both from CSS. I wired up the Crumble, the Speaker, and the activation switch just to do a test. What I found was really strange. At first it was...

Ok. I didn't want to put it to blue for instance, and I know one of the modes is Red and Blue, so it would be half powered. I want full 1023 power on this dude for brightness.

ALSO: Here is the...

Hi guys,

Hoping someone could check my wiring schematic real quick. I've included a picture!

I'm using the Pico Crumble. Trying to keep it real simple!

Main questions.
1. I am *assuming*...

Thanks JB. I'll get in touch with the makers of the Crumble and see if the believe I'll have an issue putting my spark fun lipo charger in parallel with their sound board.

As a side note (and...

Haha ok, RTFM was totally fair. I reread the manual and yes, upon closer inspection it did answer some of my questions.

1. If I solder to a certain paid, that pad and my accent LED will indeed go...

Thanks! I watched parts one and two. That was incredibly helpful. I was halfway through modeling a part to 3D print that would house the battery and board, and it looks like the part already exists! ...

Hey guys,

About to start CNCing my second saber here, and I'm hoping to add sound to this one. Problem is I have no idea where to start. I went to the Sound second on custom saber shop, clicked...

Darn, I thought I'd included the URL: http://www.thecustomsabershop.com/Push-onpush-off-switch-with-black-button-P40.aspx

If anyone could let me know that would be awesome! I am scheduled to...

Hi guys,

Does anyone know the dimensions of the black button switch sold on custom saber shop? The diameter of the mounting hole is most important, as well as the length of the part (preferably,...

Thanks a lot guys. After a lot of thought I am planning on going with a simple LED, resistor, and 3.7 cell. I considered buck drivers, boost drivers, the flashlight driver, etc etc and ultimately the...

Hi guys,

I?m working on my first LED saber and I have a few questions. I?m doing the machining myself but looking to buy most of the electronics from the custom saber shop. I?m just confused by a...