When I did mine, I found that chrome license plate screw covers are about the right size. I painted it with very light coats of Duplicolor Metalcast orange spray paint. Go slowly, and compare the...
Type: Posts; User: MandaloreJedi
When I did mine, I found that chrome license plate screw covers are about the right size. I painted it with very light coats of Duplicolor Metalcast orange spray paint. Go slowly, and compare the...
The chassis disk for the Nano Biscotti also works for the Pico Crumble.
An adapter so you can use a switchcraft recharge port in a 12mm hole.
I damaged the chrome bezel on mine by prying it off. Personally, I would drill a small hole in the top of it and pry it off that way. Then go to a local auto parts store and get some chrome license...
The problem with this saber is that the conversion blade holder doesn't fit- the emitter hole is too small. You can use it if you cut off the top of the blade holder, the part that fits through the...
I just received my NB chassis disks, and the Crumble fits perfectly. The spacer size will be about 5/8"
I had that issue with my 2005 Luke Jedi also. I bought a cheap strap wrench at Menard's for $11, and it worked perfectly without damaging the emitter. I did have to heat the emitter with a craft heat...
If it's on the Hasbro Black Series saber, I don't think it is meant to come off.
All you have to do is remove the battery pack, remove the control box and clip the switch wires, and push down on the...