Hi. Sorry for the delay, I've been waiting for my aux switch to come in so I can try what Zook suggested. Also I'm using a simple one die setup until the color extender comes back in stock. No I...
Type: Posts; User: rlh14
Hi. Sorry for the delay, I've been waiting for my aux switch to come in so I can try what Zook suggested. Also I'm using a simple one die setup until the color extender comes back in stock. No I...
Personally I have my speaker about 1.36 inches from the bottom own my saber, and that seems to give me a good enough sound for my taste. Although keep in mind I'm still new to the saber building...
Ok I recharged the batteries and it worked :) lessons learned lol. However, theres another problem. The led doesn't come on when I hit the activation button it only flashes on the flash on...
Thats awesome. I like the idea for the design.
ok just to clarify I'm using a 7.4 battery holder using those trust fire batteries. Im going to check the batteries again and if need be, as a last resort I might get a new style battery pack from...
yes they are fully charged. they are the TrustFire Protected 3.7V 900mAh 14500 Lithium-Ion Battery pack.
ok thanks i"ll tinker with it some.
no I didn't back it up. lol that was a mistake XD. does it matter if i have the aux switch wired on?
I reconnected the old switch and still no luck. should I try and get a new SD card from the shop? Would that help?
yes the SD card was in. I had another momentary switch that worked before this was going on. yes the battery was connected. I wasn't soldering it I was just touching the switch wires to see what...
So I've been soldering my crystal focus recently and I think I may have broken it. When I put in the batteries (essentially pulling the kill key) all seems to work fine but after I hit the activation...
Im interested in a tutorial like this as well. It sounds like a great project.
I will probably try and manually change the config. Thanks for the help
Hi. So heres the problem. Yesterday I finished soldering my Crystal focus board, but when I tried to use the RICE port it wouldn't sink to my computer. so I read somewhere to try and swap the tx and...
Thanks to everyone for the help. I think I'm almost ready to start wiring. Also just so everybody knows I found that diagram somewhere online I can't remember where. I dont want to take credit for...
I just reread you post and I get what your saying oops lol. I guess your right about just taking out the battery. The battery pack I linked will work though right?
Yes I do want to remove the batteries that way I can put in a replacement pair while the others are charging. I thought I needed a recharge port so I can put in the kill key for long term storage.
If I'm correct its these http://www.thecustomsabershop.com/TrustFire-Protected-37V-900mAh-14500-Lithium-Battery-2-Pack-P342.aspx
Ok. Will it still work with the Crystal Focus like a battery pack? If its a battery holder does that mean it doesn't need a kill key?
Hi. Im wiring a Crystal Focus W/ Color Extender saber. My question is about the kill key. Im planning on using this battery pack...
Thanks Again. This was extremely helpful. Good luck finishing your Luke V2 saber
Wow that was fast! Thanks so much. Do you think color extender will be back in stock any time soon?
Hi. I was wondering if the Petit Crouton color extender here http://www.thecustomsabershop.com/Petit-Crouton-V3-Color-Xtender-P911.aspx is the same as the Crystal Focus color extender. Will it work...