Search:

Thanks. I used Testor spray lacquer. They covers nicely.

No problem. Glad to be of help.

Thank you. I bought them over a year ago from Hasbro's online store. They had the pre rebels version vader ones for $20 so I bought 2 of them. It just took me a while to research and collect all the...

Here is the wiring diagram.

http://i82.photobucket.com/albums/j250/lewman1/LEWIS/Lightsabers/wiring%20diagram_zpswatlplsh.jpg

This is the LED I used:

EPISTAR 20mm RBG LED

RGB (4pin +, R,B,G)
LED Emitter: 3W

DC Forward Voltage (VF) : Red 2.0-2.6V, Green: 3.0-3.6V. Blue: 3.0-3.6V
DC Forward Currect (IF) : 700mA...

Thanks guys. I'm working on a full wiring diagram, but in the mean time I a detailed pic of how I wired the Ultimate FX soundboard so you don't have to keep that demo switch attached. The jumper is...

This is my second build. Like my first one I used pvc for the hilt. The soundboard is from a kids ultimate fx vader lightsaber rewired to get rid if the demo switch. I used a 3W R/G/B LED which I...

if you wire the White wire (BP23) to the Gray wire (GND). you can bypass the demo switch


[edit note: added pic of how to rewire the board to remove the demo switch]

Thanks. No there is nothing wrong with a PVC saber. For those of us with out access to metal shops, it allows us to create some unique hilts. I'm pretty impressed with how it turned out myself.


...

I discovered the world or custom sabers a little over a year ago. I tried to talk my wife into letting me purchase the parts to build an MHS saber, but being the way she is when it comes to money (a...

Thanks a bunch. I was planning on putting the retention screw closer the the blade. I just wasn't sure on how deep to sink the blade.

Hi first time posting, but a long time lurker. I'm building a pvc saber using the soundboard from a vader ultimate fx saber. I figure this would be a good practice run. I have my electronics working...