Search:

Thanks Jake - you guessed it!

Any further suggestions on the resistor value? Presumably the MOSFET is setup for current gain.....

Yep, my board shipped without the resistor. Now to try and find out a reasonable value.......

My flash on clash stays on - when ever I bridge the two top pads with any resistor.

No shorts. But looking at the board it looks like there is supposed to be a part soldered between the R AND -...

I've done quite a bit of soldering with the Hakko irons/systems. I highly recommend them. You should be fine with everything I've seen for sabers boards. microprocessors and lots of tiny 0102 or...

Yep - I was pretty confident in my analysis ---- I just wanted to point it out for anyone reading the manual that was not as familiar with electronics! One thing I've learned from helping others...

I agree this video was excellent - gave me the courage to try it on my own.

Thanks!

Thanks for the ideas guys - I like both of them.

Indis!

Hi,

Just wondering what people are doing for the recharge port, when no kill key is inserted from a visual standpoint....

I'm considering adding the 2.1 switch to the pommel - but I am not...

Just a quick question - has anyone used the wiring diagram for the tri-rebel as shown in the NB manual?

To me it looks like there might be a problem, that the FOC is not across the 3rd diode as I...