Search:

How much do you think a custom hilt with red led inside it ( no sound ), a thin walled 1" polycarbonate tube, and a thick walled 1" polycarbonate tube, * a bonus is some custom made "starkiller"...

http://tinypic.com/usermedia.php?uo=8SRJv%2FfMhaucdiXHVq%2FMqA%3D%3D

http://tinypic.com/usermedia.php?uo=8SRJv%2FfMhaunJ1W2wFl2zw%3D%3D
...

so if i get the red led 3000 mcd will i need the 1/8 watt 150 ohm or the 1/4 65 ohm?

I will stop by radioshack on my way back from wrestling practice ( skipped school today shhhhh) ha, but is that all i need to pick up is 1/4 watt 65 ohm resistors... to go along with my 5mm 1.8volt...

is this how i would set it up?
http://i157.photobucket.com/albums/t45/DarthMorbius1977/Outer%20Rim%20Armory/Simple.png

would the resistor i have now be bad? it's a pain driving to the mall so many times a day rofl :eek:

2 AA's

well i bought a 150-ohm 1/8 watt carbon film pack of resistors will that work?

ok i went to radioshack and bought a 5mm Red Led 1.8 volt . 20mA . 120mcd... is that a good one to do illuminate? here is a pic of what it looks...

i can't get it paralell it starts turning every single time i put it in the tube

my tcss double wrap doesn't have a corbine effect on my blade... what am i doing wrong... its just slanted lines like this

/\
|/|
| |
|/|
| |
|/|

are they pretty bright?

what exactly does a red led indicator do?

ok i did all the right stuff its just my led was way too **** weak... it was basically a waste of wiring... maybe i did it wrong but i followed the diagrams... i see a tiny red glow on the bottom of...

what exactly is the negative side? and will butt connectors work instead of sodering the wires?

Ok it is a small red led that can take up to 12 volts and a resistor is included... there is a red and black cord coming from the small led... and pictures below stating the ones in my hilt , so do i...

yea sorry i had an error my pics were too big... will size down tonight

Hello I have an ultrasaber vagabond lightsaber that i have customized and i was wondering if i could wire another small led light inside the saber... if so size is not a problem i just need to know...

i have single wrap tcss film already if i order another single wrap will that be equivilant to double wrap or is double wrap diffrent some way?

shoul that make my blade even out, do i need more blade film and clearphane too or what?

ok i cut the tube down to 36" and it shines a little better now, but it still the bottom is way bright and the top is bright and then the middlish top is just way too dim... and am i supposed to be...

well on the tip of the blade i had aluminum duck tape... is that bad? and for the cellophane i unrolled just as long as the saber was... idk what pple mean by 3 or 4 feet... width on the cellophane...

I just made a 3/4 40" thin walled saber and the bottom is good and very tip of the blade are good but the middle sucks... can anybody help me make the middle brighter? i have 1 layer of tcss blade...

a shroud? how would i get something in there to cover the dispersed light up without covering the led itself?

If i made a new hilt and i made that hole or whatever... what would happen if i cut the hole too large and had the hole above the led? would the power of the led go off of the blade and just spread...