Welcome to the forums! Good luck with your first design!
Type: Posts; User: craig139
Welcome to the forums! Good luck with your first design!
Congratulations! You have taken your first step into a larger universe!
Perhaps this would be of help:
http://forums.thecustomsabershop.com/showthread.php?7587-Economy-Version-Hasbro-Sound-Tutorial&highlight=hasbro+sound
www.makershed.com has lots of practise boards to learn soldering on. There is also this book for 3 bucks:
http://www.makershed.com/products/learn-to-solder-book
Is it possible that you didn't log in to your account? If so, it may seem as if you are adding items to your wishlist, but they aren't really there till you log in.
Though if it is a sink tube, you could always put a nut on the inside.
Here is the screw: http://www.thecustomsabershop.com/8-32-x-14-socket-head-P107.aspx . The mount required is an 8-32 hole that you can have done by TCSS I beleive.
Thanks Ronin!
Thanks Ronin!
If you are intending on wrapping the hilt with leather, why pay extra for the fluted main body?
That is an interesting idea Starwinder! Thanks!
I thought that might be the case. A pity there are no 12mm boxes available. Thanks for your help!
The threading for a bladeholder is designed to hold the LED heatsink in place between the BH and whatever downstream component you screw it in to. Adding a trim ring would allow the LED/headsink...
Hi. Silly question, but is the 12/16 mm spec diameter or length?
Thanks!
Nice saber! OUt of curiosity, why use the resistor rather than a Buckpuck? And what is media blasting?
Thank you FJK for the informative video. Just so you know, Radio Shack will soon be having LARGE clearance sales as they are closing many of their stores.
So approximately 1.3 inches (1.2993"). This module ( http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx ) will hold a Nano Biscotti card, battery and speaker, and is...
First off, what is the inner diameter of your saber?
I used this item: http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx . It worked very well after making a few modifications. This will hold the battery, speaker, and...
That depends on how you want your blade holder to look. I went with a type 10 blade holder and felt that a thumb screw would foul up the lines of the holder. So I went with an 8-32 set screw rather...
I would say this one: http://www.thecustomsabershop.com/MHS-speaker-mount-V5-For-28mm-Speakers-P887.aspx . The reasoning is that given the battery you have chosen, you will need to use the chassis...
It seems to me that you would need a separate board that would trigger off the Prizm to delay the start up your crossguard LEDs. This board would then have to monitor the current drive to the...
What sort of chassis infrastructure are you using to hold it all together?
I have a similar blade holder(style 10). I specified a location along the centerline between the prongs and about midway from the non-threaded base to the lowest point between the prongs.
10674