Search:

When you select your color on the P4, it gives you the options of red, green or blue. Yes, Tim carries a white, but that particular color is currently out of stock, which is why when you choose...

I figured that might be the case. At any rate, I think I will just get the proper resistor I need for the LED and the switch.

In which case, as I am wiring the blue and the die in series, I want...

So I have some spare parts lying around, and I thought about using them to wire up a stunt hilt until I get the requisite electronics to finish the job. I already purchased the Tri-Rebel (Rb/Rb/W) I...

There is a chance the switch is hot glued in place. Look around the switch for anything that may have oozed out the opening, or try to get the battery pack out of there and have a look inside with a...

Are you running all 4 AAs in that holder? That would be pumping 6V to the board, which could cause problems. The board is made for up to 5.5V. Hence why it calls for a 4AAA battery holder with NiMH.

Good design. I like the combo brass switch with that box. Really stands out.

Have you considered the rebel red? It's a solid contender for the P4, for sure.

Also consider "smoked chrome"... It is the same finish madcow uses for his carbonite powder co great color, but ask Tim if he carries it first .

The NB is only compatible with momentary switches, so just put the latching switch out of your head. Just use a wiring harness and this momentary. It is orange, like the one you have in your OP.
...

Not latching, no. But you should be able to find a momentary version of the one you want.

Thanks everyone. The compliments from such amazing builders here is very humbling. I have another project (for my wife) coming down the pipeline, so stay tuned.

Yeah, to be perfectly honest, that portion of the shroud was a pain, and I know I rushed it. I will definitely touch it up.

Sorry, totally forgot to take a pic of the other side!

Here is the placement of the recharge port and switches. On a side note the recharge port was pretty much flush with the edge ofthe saber,...

GODFATHER
PC 2.0
Tri-Rebel RRW w/Reds in Series and White foc
2w high bass speaker
7.4V Li-Ion battery pack
MadCow's "Korriban" soundfont purchased at Saberfont.com
100% MHS based parts

http://i1182.photobucket.com/albums/x444/HeroofEverything/th_3D21AB5B-4EEE-4077-A46C-3AAA3439A392-6627-00000AD84645796D_zpsec4b82d6.jpg

Looks like I fixed the foc.

Haha. Yeah, that is the plan. This is all really just the test install. Once I know all the "features" work, it will be time to take it apart, paint it, do a (cleaner) reinstall, then send it out the...

Will do. Thanks for the heads up.

Seems when I trimmed the leass off my accent Leds, I forgot which one was which and wired the accent leds backwards. Does that mean they are dead and I need to order new ones or can I just switch em...

I have Madcow's Korriban on the sith build I am working on, and let me tell you, it is more than a Dooku font, it is THE quintessential sith font. The swings have that deep synthetic buzz to them,...

The two yellow are the (+) for each led and the green and orange are wired together for the ground return. I had thought of splicing the wires further up, but was concerned about how sturdy it would...

http://i1182.photobucket.com/albums/x444/HeroofEverything/3E957437-8E64-4AFC-877C-D25786979ED3-3904-000007070FB1208E_zps02ae598a.jpg

Here is a close up of the Power Extender, any constructive...

So I just finished my first MHS build and most everythig seems to be in good shape, except the foc and the accent leds aren't working. I wasn't sure if this would be a config problem, as I left...

Heck, I woulda crapped my pants to have something that cool 10 years ago. Very nice.

Very well done, and very original. Bravo!

Looks to me like the pin is missing. That should keep those two pieces together.