:shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::sho...
Type: Posts; User: Ari-Jaq Xulden
:shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::shock::sho...
Another tip, grab one of their Self-Centering Drill Press Jigs while you're getting the press. You don't want it moving while drilling.
Forstner bits are really for wood. Yes they can be used, but not well. What you want is a countersink bit. Go slow, a few turns, then test. It is real easy to go too far. Keep the bezel on inside...
Heh, old school K3GR1 shroud. Nice touch Canni.
What your wanting can be done. However as SS stated the wiring will be little more complex. First off the NB is not designed to drive more than one LED at a time without the assistance of a power...
Lots of failed attempts
Too light. Sticky residue left from improper flow.
http://i366.photobucket.com/albums/oo105/ari-jaq_xulden/craftsman/tut006.jpg
Too dark in grooves....
Very difficult color. Took me about 60 attempts to get the color I wanted. Too thick of a coat, cook too long and it looks completely different. From pale fake looking all the way to orange.
...
http://i366.photobucket.com/albums/oo105/ari-jaq_xulden/IMG00055.jpg
Holoprojector to talk to Master Yoda B-)
Can you change the element in your iron?
For your blade needs http://www.thecustomsabershop.com/White-shouldered-1-thick-walled-blade-tip-with-reflective-disc-P630.aspx
For the hole, you have 2 choices; 1 you could get the standard size...
Flush mount, your hands will thank you.
Yes, just make sure when you cut, and strip that your pliers/strippers don't accidentally touch the other (especially an exposed) wire at the same time. I sometimes use a piece of pre-shrunk wrap as...
Pm Zook. He does repairs.
No, they will not fit over a sink tube.
Ah, now we are getting somewhere. Okay the diagram for the link is broken. Here Is the link to the thread. Maybe some one will chime in and re-post the picture. IIRC you use the two purple and the...
What board is that? Where did you get it? I need a bit more info to help. Just to hazzard a guess at this point, there should probably be a clash sensor hook up somewhere in the bunch for the led....
Not sure where you get such a notion, but the only thing that will make it brighter or lighter would be driving the FoC die with different amperage than the main dies.
You can't do a white FoC with filters, unless you do a tri-rebel all white, then cut out a smaller circle from the larger circle, and lineup the filter with the correct clash die each time you want...
The search function is your friend, but everybody gets one.
9 part tutorial.
As I explained in the link I gave you in your previous thread : "The windowed connection on the port goes to the puck (B-), the pin(on the recharge port) gets both positives (B+ connection on puck...
Yes. This is the only way it works.
Now that I see the MWS buck puck I see some other issues. This happens all to often, You should look at the back of the board, and the description of what they mean here . What you should have asked...
That is a latching switch. The Jst's will hook up to the other two for your light. My mistake earlier, I thought you were using the momentary switch. Depending on how your hooking it up you might...
The third picture in the store shows it. + & - led are marked, other two are switch leads, doesn't matter which. The long one is the harder one to get.
A while back I got fed up with my cheap $20 helping hand. It led me to do some digging and I found a tutorial on an RC forum.
...