Search:

Type: Posts; User: RobMcLaury

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    13,756

    I had it back on the RICE, and moving the blue...

    I had it back on the RICE, and moving the blue all the way up to 1023 its very dim. What settings would I need to look at in the config. This is my first real time working with the RICE config or any...
  2. Replies
    3
    Views
    13,756

    Crystal Shard 2.5 RGB

    Hey everyone,

    I was working on my Crystal Shard 2.5 last night with the R.I.C.E. port and my blue LED from the RGB has gone very dim. The Red and Green appear to still be the same brightness. I'm...
  3. Sticky: Yeah, its the pin under the gold clamp. Do I not...

    Yeah, its the pin under the gold clamp. Do I not need to take off the bottom to convert the saber with saber shop conversion piece?
  4. Sticky: Just picked up a Kylo saber last night and was...

    Just picked up a Kylo saber last night and was just about to start converting it, but how do you get the pin out from behind the gold clamp in the beginning? Looking at mine I have part of the metal...
  5. It will work but you will have to drill and tap...

    It will work but you will have to drill and tap the original holes on the conversion piece with a 10-32 bit and tap. You'll also have to shave down the screws a bit on the Red Button and Glass Eye so...
  6. Replies
    3
    Views
    3,342

    It might be that the solder for the red wire...

    It might be that the solder for the red wire might be running onto the other solder point. It could also be that the Luke board is mirrored from the Kylie Ren board. Just my thoughts. haven't gotten...
  7. Replies
    3
    Views
    1,979

    The aluminum discs you used, were those found...

    The aluminum discs you used, were those found parts or custom made?
  8. Replies
    3
    Views
    1,979

    Anakin RotS 2005 Kit "Wiggle"

    Just finished my converting my 2005 MR Anakin RotS kit today, and Im noticing a slight wiggle up at the blade holder. Now, I did not tape the blade holder to the rest of the electronics as I could...
Results 1 to 8 of 8