Search:

Type: Posts; User: majs16

Search: Search took 0.01 seconds.

  1. It is the NBv4 from the store which says in the...

    It is the NBv4 from the store which says in the specs section that it supports neopixel strips
  2. I made sure to copy the entire package and files...

    I made sure to copy the entire package and files onto my computer as a backup in case something like this happened. I've toyed around with using the initial config and fonts used (obviously making...
  3. protected18650max 15A continuous discharge...

    protected18650max 15A continuous discharge 3120mAH also from TCSS store
  4. NeoPixel blade doesn't work, distorted sound on all non-boot up sounds and beeps.

    So I recently completed(ish) my first build but I canít get the blade to ignite. For reference, this is an NBv4 with a NeoPixel blade. All parts bought from TCSS.

    The board itself is all soldered...
  5. Replies
    2
    Views
    932

    Can confirm it's the speaker mount. The lip is...

    Can confirm it's the speaker mount. The lip is slightly larger than the ID so when you slide it in it catches on the last 1/8th of an inch to hold in place.
  6. Replies
    2
    Views
    596

    Thank you! I wasn't sure if the 0.05" would...

    Thank you! I wasn't sure if the 0.05" would really matter. I'm assuming the clamp is made of aluminum...? so grinding it won't be too hard
  7. Replies
    2
    Views
    596

    Replica Graflex Clamp with MHSv1

    Does anyone know if the replica graflex clamp that TCSS sells will fit on an MHSv1 Main Body? I think it would look really nice on there and want to add one but am unsure if it will be too loose or...
  8. Replies
    7
    Views
    2,326

    I've actually done this type of build and just...

    I've actually done this type of build and just finished the hilt. I used an MHSv2 5" extension as the main body and then a 3" MHSv1 extension as the switch/NeoPixel hilt-side holder. Also used an...
  9. Thread: NBv4 Help

    by majs16
    Replies
    12
    Views
    781

    That would be very much appreciated! I bridged...

    That would be very much appreciated! I bridged the L1 and Neg. pads accidentally but I removed it before I took any pictures. I don't believe any other pads were bridged but there's a chance that...
  10. Thread: NBv4 Help

    by majs16
    Replies
    12
    Views
    781

    Thanks for the advice! I've desoldered everything...

    Thanks for the advice! I've desoldered everything from the board so far and am going to do what you suggest and see if that works out. I'm also working on shortening the wires on everything so...
  11. Thread: NBv4 Help

    by majs16
    Replies
    12
    Views
    781

    For the switch, I followed Madcow's video in the...

    For the switch, I followed Madcow's video in the wiring the switch and as far as I am aware I wired it up exactly as he did. The wiring diagram includes the "+" and "-" signs on the switch portion...
  12. Thread: NBv4 Help

    by majs16
    Replies
    12
    Views
    781

    NBv4 Help

    I am not quite sure this post belongs here but it seems to be the most relevant category so here goes:

    Earlier this week I began to build my first saber, it's a NeoPixel NBv4 build (ambitious, but...
  13. Replies
    4
    Views
    599

    Thank you! I may look into the splicing option

    Thank you! I may look into the splicing option
  14. Replies
    4
    Views
    599

    Thank you! I think for the time I will stick with...

    Thank you! I think for the time I will stick with single blade color. That being said I do have an extra teensy board lying around. Do you know the dimension specifications for the teensysaber...
  15. Replies
    4
    Views
    599

    Multiple Colors in LED strip blade

    After searching the forums it appears this question has not yet been asked:

    I am doing a custom saber using the neopixel strips from the store and am planning on hooking these up to the NBv4...
Results 1 to 15 of 15