Thanks... That's what I figured.. I am just waiting for the rest of my stuff to be delivered tomorrow... I already 3d printed parts I needed..
Type: Posts; User: morpheus1977
Thanks... That's what I figured.. I am just waiting for the rest of my stuff to be delivered tomorrow... I already 3d printed parts I needed..
I am working on a project and the LED's I want to use have a forward voltage of 3.7 v typ - 4.5 max. 20mA typ The blaster core sound effect card outputs 3.3 v 18mA on the ray progression outputs.....
Can 4 led's (4 barrels) be driven off of the one main barrel connection on the board?
Does anybody know where I can get my hands on a 12v li-ion rechargeable battery pack??
That's what I am going for.. I am using a Blaster Core V5.0 The way the Auto/Single fire works is either off or on.. (It does work with a simple latching switch). So It doesn't use two separate...
The problem is with most rotary switches. You rotate the switch the same direction to turn it off or on. I am looking for something that's bi directional. I want to switch between single fire and...
I am trying to locate a latching rotating switch. A simple, turn one way it's on and turn back it's off. Anybody heard of something like that? Or where I can find it?
I just wanted to make sure I have my train of thought on the tracks and going in the right direction..
I am starting a new project soon, and I am going to be using a Blaster Core sound board. I...
Default Question for anybody who has used the Blaster Core 5.0
If this is not the right place to post this, Mods please move. I just figured since the store sells it here. It would be ok to...
Mods please delete this post. I have moved it...
If i wanted them both to turn on using a momentary switch. Could I still use a spst
Thanks for the advice everybidy. I have almost everythibg i need
The store i went to only had one 8 AA battery holder. So i grabbed that and 2 of...
I have two of these computer fans.
http://i17.photobucket.com/albums/b81/morpheus1977/Mobile%20Uploads/20161001_151049_zpse2tiyikg.jpg
and these are its specs...
They are wired parallel I believe. I had all of the pos leads soldered together then going to the battery pos after the switch. The neg leads soldered together, then that line going to the battery...
I am re-reading the manual now.. I have one more bank of LED's I can use....
the whole thing with the LED pos and neg. I always have to double check I forget which is pos and neg LOL
sorry I know my bad. (normally I am pretty good when it comes to giving detailed info)
this is the battery pack I was using.
7.4v Li-ion 800mAh 14500 Battery Pack
the led I was trying to run....
well I don't know what I did wrong. I wired the pos of the led bank after my switch and the neg to the battery lead. But when I flipped the switch all of the LED's in the bank burned out. (I even had...
yup planning on having audio, trigger, clip sounds the works. Those I have not problem hooking up because they have dedicated solder pads. I was just a little iffy on the bank of LEDs. Those will be...
*note * this will not have a kill switch or a recharge circuit
I am working with a blaster core from plecter labs and I just wanted to confirm my wiring (mainly my battery and switch)
...
I don't have the connector in front of me but from what I remember there were only two solder pads on the connector it's self... It just threw me off because I know USB also transfer data which...
I have had lots of help in the past when it comes to wiring. So I thought I come here one more time...
I am doing a mod on a prop for SDCC next week that will use my cell phone. (its the pipboy that...
So I am working on my Gears of War armor/costume for San Diego Comic-Con. I wanted to add some accent LED's to my helmet and my armor. Now I know how to wire up LED's and all of that. (thanks to...
Well my next project is to make some foam GOW armor for SDCC.
I don't know I was thinking about just taking it all off.
Thanks I know how u feel about the blood I was thinking about trying to take it off.