OK wiring check time see if this works if it does woohoo also is there someone I can pay to do the wiring for me sadly I have carpal tunnel so I can't solder in close proximity it looks like a...
Type: Posts; User: Enzerumo
OK wiring check time see if this works if it does woohoo also is there someone I can pay to do the wiring for me sadly I have carpal tunnel so I can't solder in close proximity it looks like a...
OK new plan the US2.5 i bought got fried in transit so that sucks any way here's the new plan white P4, Asajj fx soundboard, recharge port ,AAA 1000mAh NiMH Rechargeable battery, 4AAA battery pack,...
ah ok thanks for the info but woohoo i turned it pink
ok so here's my question is it possible to have both the Jedi and Sith on at the same time and setting it to the middle on the tact switch?
OK new plan the US i bought got fried in transit so that sucks any way here's the new plan white P4, Asajj fx soundboard, recharge port ,AAA 1000mAh NiMH Rechargeable battery, 4AAA battery pack,...
ok so would the 4AA pack with 4x AA 2600mAh NiMH Rechargeable battery that Tim sells work or should I get TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery and make my own battery pack? Mind you...
instead of a P4 I plan on getting a Seoul SSC P7 White led first question
what else would i need to add or change to get this working?
so has anyone ever taken apart the saber if so is there any possibility of Tim making a conversion kit?
I got an old Yoda(pre-hasbro, MR version) I could cannibalize would I need to add some resistors to it though?
well bollocks well then what you suggest I get? crystal focus? or what else is there?
no neither but I can wait for the Ultrasound and I decided to go with the P4 white higher lumens
I don't plan on using it as a kill switch but a secondary precaution to prevent trickle draining the batteries and risk frying the board during recharge.
Ok so I need a guru to check my wiring. If you have any input tell me if I need resistors and where. I know the diagram is terrible but I'll explain.
Legend:"MSW"= Momentary switch
"LSW"=...
I need info about these you know prices, recomendations that sort of thing.
I duddest thanx to nice ppl like you guys
ok I got the sleeve out but when I try to slide the internals out it feel like its stuck how do I fix this?
I can not figure out how to remove the inner plastic tube so I can remove the innards.
looking at the pics the maul will be the easiest to mod out of the 2 I belive it will have the same type of structure as Mace like obi will be like luke's.
http://i23.photobucket.com/albums/b398/Enzerumo/maulfx_1.jpg
http://i23.photobucket.com/albums/b398/Enzerumo/obiwanfx_1.jpg
http://i23.photobucket.com/albums/b398/Enzerumo/sidious-EP3-1.jpg
my lame el saber hilt
http://i23.photobucket.com/albums/b398/Enzerumo/igs.jpg
and my non working chibi-dukoo hilt
http://i23.photobucket.com/albums/b398/Enzerumo/minidooku2.jpg
I did an experament I took a stock MR blade and with the foam that covers the leds i sliped some of tim's HD polyethylene inside and took a simple led from radioshack and stuck it in there it was...
why not put a lens in the center of the blade and a dime mirror at the tip?
I made this a while ago from stuff from lowes
http://i23.photobucket.com/albums/b398/Enzerumo/minidooku2.jpg
http://i23.photobucket.com/albums/b398/Enzerumo/minidooku.jpg
its about .45 scale but...
the motion and clash driver for Luke's Rotj rerelease
http://i23.photobucket.com/albums/b398/Enzerumo/motionclash.jpg