So, I wanted to reconfigure the board for one-button use and make sure that i was on the new ProffieOS but it is not letting me upload the ProffieOS.ino onto the board. I have followed all the...
Type: Posts; User: majs16
So, I wanted to reconfigure the board for one-button use and make sure that i was on the new ProffieOS but it is not letting me upload the ProffieOS.ino onto the board. I have followed all the...
It is the NBv4 from the store which says in the specs section that it supports neopixel strips
I made sure to copy the entire package and files onto my computer as a backup in case something like this happened. I've toyed around with using the initial config and fonts used (obviously making...
protected18650max 15A continuous discharge 3120mAH also from TCSS store
So I recently completed(ish) my first build but I can’t get the blade to ignite. For reference, this is an NBv4 with a NeoPixel blade. All parts bought from TCSS.
The board itself is all soldered...
Can confirm it's the speaker mount. The lip is slightly larger than the ID so when you slide it in it catches on the last 1/8th of an inch to hold in place.
Thank you! I wasn't sure if the 0.05" would really matter. I'm assuming the clamp is made of aluminum...? so grinding it won't be too hard
Does anyone know if the replica graflex clamp that TCSS sells will fit on an MHSv1 Main Body? I think it would look really nice on there and want to add one but am unsure if it will be too loose or...
I've actually done this type of build and just finished the hilt. I used an MHSv2 5" extension as the main body and then a 3" MHSv1 extension as the switch/NeoPixel hilt-side holder. Also used an...
That would be very much appreciated! I bridged the L1 and Neg. pads accidentally but I removed it before I took any pictures. I don't believe any other pads were bridged but there's a chance that...
Thanks for the advice! I've desoldered everything from the board so far and am going to do what you suggest and see if that works out. I'm also working on shortening the wires on everything so...
For the switch, I followed Madcow's video in the wiring the switch and as far as I am aware I wired it up exactly as he did. The wiring diagram includes the "+" and "-" signs on the switch portion...
I am not quite sure this post belongs here but it seems to be the most relevant category so here goes:
Earlier this week I began to build my first saber, it's a NeoPixel NBv4 build (ambitious, but...
Thank you! I may look into the splicing option
Thank you! I think for the time I will stick with single blade color. That being said I do have an extra teensy board lying around. Do you know the dimension specifications for the teensysaber...
After searching the forums it appears this question has not yet been asked:
I am doing a custom saber using the neopixel strips from the store and am planning on hooking these up to the NBv4...