Search:

Type: Posts; User: Forgetful Jedi Knight

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    34

    You would use just one of the (+) and (-) wires...

    You would use just one of the (+) and (-) wires to the crystal and it should be CFX -> crystal -> blade.

    To answer your other question, yes, just add one pixel.
  2. Replies
    3
    Views
    34

    From the looks of it, you can wire it in series...

    From the looks of it, you can wire it in series with your main blade. From the CFX, the wires go to the various “in” ports, and the “out wires” go to your Neopixel connector in the blade holder.
  3. Replies
    5
    Views
    376

    No, I didn’t install one in that saber. Being...

    No, I didn’t install one in that saber. Being able to easily remove the grip gives me (and the end user) easy access to the USB port. ;)
  4. Replies
    5
    Views
    376

    Yeah, they do. I’m not particular a fan of where...

    Yeah, they do. I’m not particular a fan of where you have things placed within the hilt, but I understand it using the pieces you used. I basically stopped using the 7” main bodies years ago for that...
  5. Replies
    5
    Views
    376

    We would need to see the saber design and...

    We would need to see the saber design and such.Pics would definitely be helpful here. They need to be hosted elsewhere and you post the links here. I have a post about it floating around somewhere.
  6. The continuous blinking / solid red means the...

    The continuous blinking / solid red means the board can’t read the card.
  7. That is correct. I just wanted to make sure that...

    That is correct. I just wanted to make sure that is was actually installed onto the card. Just having it on the SD card doesn’t magically install it.
  8. The firmware gets installed onto the board. The...

    The firmware gets installed onto the board. The fonts and configuration files are what is stored on the SD card.
  9. You may just have a bad SD card, I’d get a...

    You may just have a bad SD card, I’d get a different one and try that.
  10. The firmware that you have installed on the CFX...

    The firmware that you have installed on the CFX determines the software version. For example: 10.006E is an older CFX Firmware version. Whatever configuration files you downloaded have to match the...
  11. Those are the ones, HOWEVER, you have to make...

    Those are the ones, HOWEVER, you have to make sure the configs match the software version the card is flashed with.
  12. The SD card has to be inserted for the board to...

    The SD card has to be inserted for the board to work. You may have to reload the base SD card configuration from the Plecter Labs site, and reformat your SD card and put that setup on it.
  13. TCSS just recently started carrying the Golden...

    TCSS just recently started carrying the Golden Harvests. Previously they exclusively carried TCSS products. I’m guessing the NB will be discontinued.
  14. Amusing to see that people are just outright...

    Amusing to see that people are just outright copying PL stuff nowadays
  15. Unfortunately, most people here use Plecter Labs...

    Unfortunately, most people here use Plecter Labs stuff, so you’re likely going to have to refer to whatever manuals are on the ST site.
  16. Off. Unless your saber has a very hard to reach...

    Off. Unless your saber has a very hard to reach recharge port, I don’t know why you’d use both.
  17. Replies
    4
    Views
    1,224

    It would only reboot if the battery was almost...

    It would only reboot if the battery was almost drained, or if you’re using an in hilt LED, or you don’t have the proper resistor(s) on the main LEDs or you have some type of wiring issue.
  18. Replies
    4
    Views
    1,224

    Define “more powerful”. If you mean lots of...

    Define “more powerful”. If you mean lots of features, CFX is likely the way to go.
  19. Replies
    2
    Views
    515

    Depending on how bad the dent is - it should be...

    Depending on how bad the dent is - it should be ok, as long as you don’t have the screw pushing up next to it.
  20. I’d check ALL of your wiring first. If something...

    I’d check ALL of your wiring first. If something was “yanked on”, something probably came loose/apart.

    After that, I’d review all of your configuration files, to make sure they’re ok.
  21. Replies
    16
    Views
    4,106

    That is fine. It’s the battery’s PCB.

    That is fine. It’s the battery’s PCB.
  22. I would guess so. Most signals on the board are...

    I would guess so. Most signals on the board are ~20mA.
  23. 10000 Ohms.

    10000 Ohms.
  24. Replies
    3
    Views
    1,421

    It would be instead of.

    It would be instead of.
  25. Replies
    16
    Views
    4,106

    That’s fine. There is no need to be scared of...

    That’s fine. There is no need to be scared of Li-ion batteries. I’ve been using them for the nearly 15 years I’ve been in the hobby.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4