Search:

Thanks FJK. I did post on FX, as well.

Thanks Tim! I went thru the manual closely and it looks like the comfig is plilh that has 3400,4200 values to it. I'll just have to search on values to replace them with.
BTW, I received my TCSS...

Hello Erv and the TCSS family,
I need help with how to program my CFX v10 board with my 18650 battery to check power level via my noepixel blade. I know to use the AUX switch (out of deep sleep),...

Thanks FJK. And MC does have a new font on SaberFont.

Hey all,
Been wondering about Rob Patkau/Madcow with TCSS and Genesis Custom Sabers. I've purchased many of his great sound fonts and watched just about every video on how to build sabers. He...

I'm actually thinking of getting rid of the Tri-Cree's and going pixel. I've grown tired of the LED style and the uneven lighting, especially at the base of the blade no matter how I've tried with...

TCSS did the Wet White and I had a neighbor do the blue for free because I changed the starter motor on his wife's car. He also did narrow the top white and bottom black strip on the blade holder.

Yep, you're correct.

Hey all,
Decided to pay homage to our little droid who's been a trooper through episodes 4-9 movies. All parts are via TCSS.
Main body is powder coated white & blue, Graflex glass eye...

Or, you can go on TCSS site and use their calculator. You just choose bat pack, LED and click Calculate. Results will be the needed resistor and also the closest one they sell.
Yours came out to 4.0...

I just posted a lengthy reply on your other thread Joshsuo with a link to the video. 18104

Just posted a lengthy reply on your other thread Joshsuo. 18103

https://www.youtube.com/watch?v=l45Ed6MHQdY
Here is the link on the You Tube video. This is for a neopixel blade and not for an in-hilt LED. I have no experience with installing a Tri-Cree in one...

Yeah. I did two of them. Vader and Rey DPE with a CFX board, neopixels and both turned out great.
I answered your reply on the Hasbro FX conversion.
I'm searching for the video I saw that gave me...

I did two of them.
In 2017 there were only three DPE available. Vader, Rey (Luke/Anakin) and Ren. I bought the Vader. After awhile, I got bored with it and did some research and found TCSS for...

Hey all,
Decided to build my own pixel blade plugs for a pixel hilt. Used a short leftover 2812 strip 7-pixels, blade side PCB w/330 ohm 0603 resister (resister value good at 330) and watching a...

I'm assuming you were referring to ST's GHv3 and not me.
I have both GH & CFX boards in my sabers. So, I saw similar settings.
I have no others boards in my sabers, so I can't vouch on those.
I do...

Thank you.
Wasn't in any ST manual, but found values and how to modify them in the PL manual.
Cofig & settings are about the same for both boards.
Did a test and it worked.

Hey all,
Built two sabers with GH v3 board and Tri-Cree in hilts. Copper Nova Tri-Cree RGB LED (all from TCSS).
I had no problem with blade colors with my programmed sound fonts. All look great...

I contacted UltraSabers where I got the blade and they said They use a 14" piece of the Corbon and it comes out to 5 wraps in the clear thin walled blade and 6 wraps in a thick walled. I'm going to...

Thank you! So, I'm guessing that a Quad wrap is just Corbin rolled four times then?

I'm a little confused about a blade that is "Quad wrapped" in a clear blade. Is it just the Corbin film rolled four times? That will only be around 11" or so. I've read about clear Cello basket wrap...

Never thought about using my meter on continuity mode to give some voltage. Thanks for the tip! Saved me from rigging up a dual alkaline 2-cell, soldering, etc.
My Fluke multi-meter prongs on...

Rounded up on the TCSS calculator and ordered the proper ones. Thanks for the help & input!

Ok, waiting on my saber parts for an in hilt build and one of the items is a Tri-Cree RGB LED disc.
How do I know what LED is what color for proper wiring to my sound board? Especially making sure I...