Search:

Type: Posts; User: Old Stormtrooper

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    442

    and should I be running dual (or more) wires from...

    and should I be running dual (or more) wires from the Prizm board to disperse the heat and load as well?
  2. Replies
    2
    Views
    442

    NeoPixel PCB connecter question:

    If using a 3.7v 15a battery, what is the preferred gage and how many wires for the 7 pin and 11 pin connecter from a Prizm?
  3. This is actually why I posed the question. The...

    This is actually why I posed the question. The choke portion (which is actually a separate piece), looked significantly smaller than almost all of the other MHS parts for wall thickness. I figured...
  4. Yes, this is what I was looking for. Thank You!...

    Yes, this is what I was looking for. Thank You! very much.
  5. For #3, I was trying to ask for "12 o'clock...

    For #3, I was trying to ask for "12 o'clock position to 3 o'clock to 6 o'clock to 9 o'clock back to 12 o'clock position" or "360 degrees like screwing the threaded parts together direction" count,...
  6. Ribbed grooved / Choke Combo Questions

    Is the Ribbed grooved / Choke Combo https://www.thecustomsabershop.com/Ribbed-grooved-Choke-Combo-P524.aspx tough enough for dueling?

    Also, does anyone have the dimensions of the "flats" on the...
  7. And..... crap. Thanks for saving me some serious...

    And..... crap. Thanks for saving me some serious ranting and throwing things. I saw the four leads and got ahead of myself.
  8. Thanks. I may end up getting one from the Shop as...

    Thanks. I may end up getting one from the Shop as back-up. I found essentially a "kit" version of the 5mm LED/switch (another site, forgive me) and will likely try to install a RGB LED from the Shop...
  9. Yellow 5mm LED/switch resistor question

    I believe the 20mA DynaOhm would work perfectly, however, would a different resistor get me more of an "Amber" color? Does this type of LED work that way?

    OR, could I "rebuild" the switch with a...
  10. Replies
    2
    Views
    548

    Thanks. Not what I was hoping for but at least I...

    Thanks. Not what I was hoping for but at least I know I wasn't missing something.
  11. Replies
    2
    Views
    548

    NeoPixel & CF8 Question

    NeoPixel & CF8 - are they compatible? I started gathering components for a build I have in mind and had to put it on hold due to real life. Now that I am getting back to it, I find myself wanting to...
  12. Replies
    5
    Views
    1,089

    I'm beginning to think you want all of my money....

    I'm beginning to think you want all of my money. :D
    Now I have more to put aside for. Wish I was rich.
  13. Sounds about what I thought. I originally planned...

    Sounds about what I thought. I originally planned on just using the gender changer, but that does not sound strong enough. The extension would probably do, but it would need to be soldered in place...
  14. Here is the pic:...

    Here is the pic:
    http://s1084.photobucket.com/user/Kevin_Lippincott/media/untitled_zpspciacoft.png.html?sort=3&o=0
    The horribly drawn lines are supposed to be the deep fluted section. The MPP clamp...
  15. I got an MPP Clamp that I'm going to cut out a...

    I got an MPP Clamp that I'm going to cut out a window in the band to use as a hide/reveal for the PLI and RICE Port and Recharge Port (unlock and rotate to check PLI, rotate further to access ports)....
  16. The deep flute piece is actually a 1.625" OD...

    The deep flute piece is actually a 1.625" OD which is thicker than a regular extension. I kinda want that thickness/difference in the build.

    Also, installing the switches, ports and PLI in a...
  17. Looking for opinions on best "work around"

    I'm planning on using a 4" Double female threaded connector: http://www.thecustomsabershop.com/4-Double-female-threaded-connector-P123.aspx connected to a 4" Deep fluted double female threaded...
  18. Replies
    6
    Views
    1,730

    I ended up getting the MPP Clamp and my...

    I ended up getting the MPP Clamp and my new/revised plan is to mount a PLI, RICE Port and Recharge Port in the body with a cutout in the MPP Clamp to be rotated as a reveal.
  19. That explains it. I haven't been interested in...

    That explains it. I haven't been interested in making a saber with a crossguard, so I haven't been researching it.
  20. I'm not familiar with the Trident RGB, what's the...

    I'm not familiar with the Trident RGB, what's the difference?

    Other than that, I think I got it. Thanks.
  21. Ok, maybe I'm just having a little trouble with...

    Ok, maybe I'm just having a little trouble with fully understanding the manual. Page 40 (CF 7.5 manual) has a diagram that only shows 2 channels running through the CEx and page 41 says to run...
  22. Tri RB/G/R vs. Quad RB/G/R/W and Other Questions

    What would the difference be? Would the addition of White make for a brighter blade or brighter FoC? Planning for the CF when it's in stock (also have the CEx). I'm looking for opinions and options....
  23. Replies
    7
    Views
    1,071

    Thanks for the info. Not how I'd prefer the...

    Thanks for the info. Not how I'd prefer the results, but thanks again.
  24. Replies
    7
    Views
    1,071

    Yeah, I think I learned a hard lesson. I tried...

    Yeah, I think I learned a hard lesson. I tried with 2 alkaline thinking they were 1.5 volts like the battery says. About a second of light, then a little puff of smoke. That sucked. Live and learn.
  25. Replies
    7
    Views
    1,071

    I was using a single alkaline. Is two alkaline in...

    I was using a single alkaline. Is two alkaline in series too much? Madcow used two in the video without the resistor. These are yellow light AV switches.
Results 1 to 25 of 53
Page 1 of 3 1 2 3